Tag Archives: News

Baja Designs XL Laser Is The Industrys First Auxiliary Laser Light

No matter what you ride, a little extra lighting couldn’t hurt. The release mentions Jeeps and UTVs, but adventure motorcyclists can also benefit. 

Begin press release:


Baja Designs has created the ultimate long-distance auxiliary light for trucks, Jeeps, and UTVs. The first aftermarket light to use purely laser-chip technology, the exclusive Baja Designs XL Laser offers nearly four times the illumination distance of comparably sized LED or HID lights. Baja Designs achieves this by combining four laser chips with its High Speed Spot optics to project the light in an extremely tight 1.5-degree pattern. This pierces darkness with 2,000 lumens of light in excess of a half mile. Each Baja Designs XL Laser light draws 60 watts of power and has a 2,000-hour life expectancy from its laser chips, which are protected by built-in over-voltage protection.

Developed by Nobel Prize-winning physicist Dr. Shuji Nakamura, laser chips offer compact output in addition to long-distance illumination. The Baja Designs XL Laser light fits four laser chips into a housing that measures only 4.43 x 3.65 x 4.43 inches and weighs less than 2.5 pounds. The XL Laser also incorporates a variety of Baja Designs’ industry-leading features. These begin with the uService replaceable hard-coated polycarbonate lens. Unlike other brands that are sealed with silicone, a cracked Baja Designs lens doesn’t require replacing the entire light or returning it to the manufacture for service. O-ring sealing also helps the lights comply with the IP69K water-resistance standard: submersible up to nine feet deep and pressure-washable.

To conform to IK10 Mechanical Impact Testing and also exceed MIL-STD810G Mil-Spec durability criteria, Baja Designs uses aircraft-grade aluminum for its housings, which are finished in Mil-Spec hard anodizing. Mounting brackets and hardware are stainless steel for corrosion-resistance.

Baja Designs is currently the only aftermarket manufacturer to offer laser-lighting technology. In addition to the XL Laser, Baja Designs also offers the OnX6 Hybrid LED/Laser bars in a variety of length. These bars combine lasers and LEDs to smoothly illuminate multiple lighting zones. All Baja Designs laser lights are backed by a 30-Day Money-Back Guarantee. For more information, please contact Baja Designs, 800.422.5292, www.bajadesigns.com.



The post Baja Designs XL Laser Is The Industry’s First Auxiliary Laser Light appeared first on Motorcycle.com News.

Shoei Releases GT-Air II Sport-Touring Helmet

Shoei released the latest version of it sport-touring helmet, the GT-Air II to motojournalists and industry professionals at Shoei’s agency headquarters in Costa Mesa, California. After a quick lunch, and mingling with our fellow guests, Matthias Beier, Shoei’s marketing coordinator, explained all the new features of the heavily updated helmet.

The engineers at Shoei put a lot of attention to reducing wind noise in the new GT-Air II. The outer shell has been redesigned to be more aerodynamic, including a chin spoiler, and beefed-up beading around the visibility port to improve the seal with the visor. There are three intake and five exhaust vents, providing more airflow in and out of the helmet to increase rider comfort. The internal drop-down sun visor goes 5mm lower than before, increasing the visibility for the rider while reducing sun glare.

One of the coolest features of the GT-Air II is its ability to fully integrate with the Sena SRL2 communication system. The helmet has specific cutouts and channels within the shell to accommodate the SRL2 components while keeping a streamline shape, which improves aerodynamics and increases safety for potential impact zones in a crash. Shoei has also added its patented stainless steel mini ratchet chinstrap for quick on and off functionality, which has been tested and proven in-house to be just as safe as a double D-ring.

The GT-Air II is offered in seven solid colors for $599, and 11 graphic designs for $699, and should be available for purchase beginning next week. With all these new features (and more) of the Shoei GT-Air II, we can’t wait to get one out in the wild and test it ourselves. We will report back with our own review to let you know how well this redesign performs. Stay tuned!

Source: MotorCyclistOnline.com

2018 Yamaha YZF-R1 MC Commute Review

Yamaha jump-started the liter-class sportbike segment 21 years ago with its original ’98 YZF-R1. Over the years it evolved, at times teetering toward a more street or track focused design depending on model year. But for its 2015 major redesign, Yamaha had its sights set on track performance first and foremost.

Right away it was apparent the Tuning Fork company certainly did its homework, engineering a competent sportbike for setting fast laps at the track. But how does it perform on the road, on the way to work? We find out in this episode of MC Commute.

The YZF-R1 is powered by Yamaha’s ferocious 998cc crossplane-equipped inline-four engine. Compared to other inline-four configurations, Yamaha’s CP4 mill offers a rowdy powerband that feels like a cross between the punchy feel of a V-twin and the screaming high-rpm performance that I-4s are renowned for. On our dyno, the 2015–2018 generation R1 engine belts out over 160 hp at the business end of the Bridgestone Battlax tire.

The engine is hung in a racy chassis with ergonomics that follow the lines of the Doctor’s YZR-M1 bike. It’s also loaded with capable and easy-to-manipulate electronics that truly complement the engine and chassis allowing the rider to set fast laps with ease. For 2018, engineers tweaked the functionality of its wheelie control (Yamaha calls it “Lift” control) as well as adding auto-blip downshift functionality allowing the rider to downshift without the clutch at lean. Will these gizmos help us wield the R1 from stoplight to stoplight? Find out now this episode of MC Commute.

Source: MotorCyclistOnline.com

2019 BMW R1250RT First Ride Review

The most dramatic change to the 2019 BMW RT is not in its aesthetics, but hidden beneath its valve covers. The stalwart boxer twin powerplant has been emboldened with a technologically advanced variable cam, which has significantly altered the engine’s characteristics. The new cam and the performance that comes with the boost in displacement move the RT further into a sporting realm, which, when married to its long-distance comfort, is an invitation for those who haven’t considered a sport-touring machine to take a serious look.

The new RT (and GS) 1250 represent BMW Motorrad’s first application of the ShiftCam Variable Engine Timing System in production. The new boxer’s overhead cam configuration uses a modified two-position camshaft for the intake valves that has two different rise lobes (one for partial load and one for full load) which controls the amount the intake valves are opened depending upon rpm. From idle to 4,000 rpm the cam rides in the partial load placement, limiting the intake valve stroke, resulting in lower fuel-air flow, which translates to smoother running and more efficient fuel economy. At 4,000 rpm an actuator shifts the camshaft laterally in its cradle, which brings the full load cam lobes into play, allowing for maximum valve lift for full volume flow. Additionally the intake valves are slightly staggered to create a turbulent swirl effect to produce a more efficient and thorough burn for combustion.

The paperwork says the ShiftCam does its magic at 4,000 rpm, however, the torque chart shows a slight lag at around 5,000 rpm, which suggests the shift is actually activated around that point. That said, the shift is virtually indecipherable. The only thing the rider feels is the pleasant, smooth rush of power that unfolds in predictable, consistent delivery all the way to redline. Most people buying the RT will not be riding the bike to its peak performance all the time, but it’s nice knowing it’s there when you want it.

The new system allows a 100-rpm-lower idle speed, reducing vibration. Additionally, the camshaft drive—previously a roller chain—has been replaced by a toothed chain. A knock sensor allows for variations in fuel quality and octane, which is good news for those taking the RT far afield where their normal preferences of fuel may not exist.

The displacement bump, from 1,170cc to 1,254cc, represents a 9 percent increase in horsepower, brimming with 136 hp at 7,750 rpm. That power is spread over a much broader arc with a less dramatic falloff after hitting its peak. For the torque numbers, where the real heart of performance lies, the 2019 RT gets a significant 14 percent boost over the previous year, delivering a lusty 105 pound-feet, which arrives at 6,250 rpm. Two ride modes standard (Rain and Road) help control that power in adverse conditions.

So what’s the visceral, real-world result of these internal changes? Plenty. The new RT has been transformed into a quick-revving machine, with characteristics closer to the response and feel of an in-line four-cylinder than our cherished, throaty boxer. Even the sound has been altered, resonating now with a slightly higher-pitched exhaust note. The horsepower and torque increase along with the broader powerband translates to a more forgiving motorcycle, capable of being lugged along for mellow touring, and then easily and instantly wicked up for some spirited riding.

The RT has a solid, planted footprint with a precise and responsive turn-in. Stability under hard braking is a strong suit, with the linked ABS doing its job without any noticeable oscillation between front and rear wheels. Dual 320mm discs with four-piston fixed calipers on the front are married to a single 276mm disc with dual-piston floating caliper on the rear. Standard equipment includes ASC (Automatic Stability Control) and ABS Pro (with Cornering ABS). Rainfall during the ride provided adequate test of the system, which at varying lean angles works exceptionally well sans any spongy lever feel. It all adds up to practicality and safety while instilling confidence.

Wet weight of 609 pounds (with allowable payload of 483 pounds) is deceptive given the RT’s low center of gravity and evenly distributed bias. Signature Telelever front end (with central spring strut) and cast aluminum single-sided swingarm/shaft drive Paralever system soak up the bumps and smooths out the ride. Available this year for the RT is optional Next Generation D-ESA (Dynamic Electronic Suspension Adjustment), which automatically adjusts front and rear preload.

With an estimated 50 mpg (compared to 47 mpg for the previous model) and a fuel capacity of 6.6. gallons, the RT will deliver a range in the neighborhood of 300 miles (depending on how much restraint can be exercised with this tempting motor).

Aesthetically, the RT sports new cylinder covers and manifold routing, with the header pipes making a somewhat vertical curve to the exhaust pipes. New cast aluminum 17-inch wheels have a sporty design while the bodywork receives a lower spoiler. Seat heights range from high at 32.7 inches, to standard at 31.7 inches, and low at 29.9 inches to accommodate a range of inseams. The headlight is a highly visible LED unit. Auxiliary LED running lights (pictured) are optional.

The RT is equipped with BMW’s Hill Start Pro, which is easily activated with some extra pressure on the front brake lever when stopped. The system applies brakes and holds the machine until the clutch is engaged. It’s a welcome device when stopped on a severe incline or an uneven surface, and especially helpful when fully loaded down and carrying a passenger.

Hydraulically operated clutch mated with the six-speed gearbox render succinct shifts, with the optional Speed Shift Assist allowing clutchless up- and downshifts—a feature easy to get spoiled by.

A host of optional equipment and an equal number of accessories gives RT owners the ability to craft their own unique ride, from Dynamic Braking Control to the 719 kit, which introduces pinstriping and an attractively stitched seat. All told, the 2019 BMW R1250RT maintains its position as a top-tier sport-touring machine that delivers serious performance with long-haul comfort.

Base MSRP is $18,645. The RT is available in Alpine White, Mars Red Metallic/Dark Slate Metallic Matte, and Carbon Black Metallic.

Techical Specifications

MSRP: $18,645
Engine: 1,254cc, liquid-cooled, DOHC 4-stroke flat twin, one balance shaft and variable engine timing system BMW ShiftCam
Transmission/final drive: Constant-mesh 6-speed/shaft
Claimed horsepower: 136 hp (100 kW) @ 7,750 rpm
Claimed torque: 105 lb.-ft. (143 Nm) @ 6,250 rpm
Frame: Two-section frame w/ bolted-on rear frame, load-bearing engine
Front suspension: BMW Telelever w/ central spring strut; 4.7-in. travel
Rear suspension: Cast aluminum single-sided swingarm w/ BMW Paralever adjustable for spring preload, rebound damping; 5.4-in. travel
Front brake: 4-piston fixed calipers, dual floating 320mm discs
Rear brake: 2-piston floating caliper, 276mm disc
Wheels, front/rear: Cast aluminum, 120/70ZR-17 / 180/55 ZR-17
Rake/trail: 25.9˚/4.6 in. (116mm)
Wheelbase: 58.5 in. (1,485mm)
Seat height: High: 32.7/33.5 in., standard: 31.7/32.5 in., low: 29.9/30.7 in.
Fuel capacity: 6.6 gal. (25L) w/ 1 gal. reserve
Claimed weight: 609 lb. (wet)
Contact: bmw-motorrad.com

Source: MotorCyclistOnline.com

Police drop charge against rider

Police prosecution have dropped charges against an army veteran rider who claimed he was assaulted by police at a March 2018 charity ride.

Michael “Magic” Parr faced a charge of not obeying the direction of police for this incident caught on video.

It occurred at Woodenbong on March 3 on the 26th annual Good as Gold ride.

The video shows Magic Parr being confronted by Senior Constable Murphy of the NSW Police Strike Force Raptor.

The hearing was scheduled for April 2019 in Kyogle Local Court, but police prosecution contacted him to say they would not proceed. No reasons have been given.

At the time, Magic made a formal complaint to police of alleged unlawful assault when the officer shoved him.

However, NSW Police Force Professional Standards Unit rejected the complaint, saying the officer’s shove was a “single approved check drill in accordance with his training”.

Click here to read the full reply.

Police Harassment charity ride profiling charge

“Police policing their own is an endemic problem,” Magic says.

“There needs to be an external body to handle complaints about police.

“People are being abused and give up making complaints because they know it will not go anywhere.

“Now police feel they can do anything they like.”

Magic says had been looking forward to his day in court.

Handlebar defect

Magic also successfully fought a handlebar defect notice issued at the charity ride.

“The judge found in my favour and was critical of police methods for measuring handlebar heights,” Magic says.

“The judge said their methods were inherently inaccurate as it needs to be done under strict guidelines to ensure the measurements are accurate.”

When Magic arrived at Kyogle Court last year, he was immediately approached by Murphy who asked to see his licence.

“He also checked my bike again,” Magic says.

Veteran assault charge
Magic on his Harley

Murphy appeared in court as a support witness to the officer who issued all the defect notices on the day.

“So anyone who had bar height infringements, especially if close to the allowed range, are probably inaccurate and wrong and they should fight them.

“However, most people can’t afford the time off work to go to court and just pay the fine and move on.

Police Harassment charity ride charges charge
The ride was roadblocked

“The whole purpose of Strikeforce Chapel on the day was to stop the ride by whatever means.

“I believe the (measurement) error was deliberate.”

Source: MotorbikeWriter.com

Motorcycle Engine Break-In Comparison

Your owner’s manual likely recommends a 600-, 1,000-, or even a 1,500-mile break-in process where you limit throttle angle and revs, and constantly vary engine speed so that all those new internal components can get to know each other. For a new-bike owner, it’s a slow, grueling march toward your first service. But do you need to bother with all those baby steps? There are riders who claim a gentle break-in is a waste of time and that you’re better off riding it like you stole it from the second you leave the lot. So, which is it?

Your new engine’s internals have microscopically rough surfaces that need to rub against their counterparts to bed-in, and that happens during the first miles of use. Once the components are polished smooth by wear, there’s less friction, better sealing, and you’re ensured good power, fuel economy, and reliability.

There are a lot of sliding and rotating parts within an engine, but what everyone gets riled up about when discussing engine break-in is the seal between the piston rings and cylinder walls. And rightfully so. Ring seal is the key condition that’s going to affect performance and longevity.

Our Test

We rebuilt two used Honda CB300F engines with new top-end parts and broke them in differently over the course of 1,000 miles.

We installed the first engine and followed the factory break-in procedure per the manual, which meant painstakingly limiting and varying throttle, and slowly ratcheting up the revs. We gave the second engine a few moments to warm up before subjecting it to plenty of hard acceleration and heavy use.


RELATED: Honda CRF250L Rally vs. Kawasaki Versys-X 300


The Results

There was hardly a discernible difference between the two engines once we tore them down. The compression and leakdown numbers were stellar and identical on both motors (235 psi and 4 percent, respectively), and all the measurements of the internal parts, including the piston diameter, cylinder diameter, piston-ring end gap, and valve clearances, were all within spec and in line with each other. The only real difference was that the ring end gap was a few ten-thousandths of an inch wider on the second engine.

The Conclusion

Was this a scientific and comprehensive test? Hardly. We had a sample size of two and only subjected the engine parts to the most fundamental mechanical analysis. But our test revealed that—for this particular engine—there doesn’t appear to be a night-and-day distinction between break-in methods.

That being said, taking it easy with a new bike is still a good idea. Even if your motor doesn’t technically need a stringent break-in, there are lots of good reasons to give yourself and your bike a day or two of gentle riding to shake things out. You need to scrub-in those new tires, bed-in the brakes, and get familiar with how your new bike turns, handles, shifts, and stops. But at least you’ll know that you aren’t causing any harm by opening up the throttle on the way home.

Source: MotorCyclistOnline.com

Wonthaggi injuries damaging to Metcalfe’s campaign

Former international hopeful to line-up at Broadford.

Image: Foremost Media.

Multiple injuries sustained in a first turn crash at Wonthaggi’s second round of the Pirelli MX Nationals have damaged Brett Metcalfe’s 2019 campaign in just its early stages.

The talented Penrite Honda Racing rider suffered a broken finger in three places, separated AC joint as well as a hematoma on his thigh after colliding with a number of riders in turn one of moto two on Sunday.

The injuries add to challenging pre-season that saw the former international endure multiple fractured vertebrae in his lower back, which he remarkably bounced back from to make the season-opener at Appin, just six weeks after the incident.

While his chances of earning the crown this season have slimmed, he’s certainly not out of the race for the premier class championship with an upcoming eight rounds granting him an opportunity to claw back the 35-point deficit to current leader Hayden Mellross (Raceline KTM Thor).

“My sole goal is to line-up at Broadford, brave the pain and get as many points as we can to stay in the championship,” Metcalfe admitted. “The biggest concern right now is the spiral fracture I have in my finger. I will head back to the clinic next Monday and we will make a decision following the second round of results.

“I felt fast but it was hard to pass, I lost a lot of time throughout the race being stuck behind riders as the track was very one-lined. In the end, I settled for fifth and I was able to make up 18 seconds on the winner so we certainly had great pace.”

Metcalfe’s fifth in race one at Wonthaggi credited him 17th overall, pushing him back to 13th in the series rankings after previously holding down fourth. The MX Nationals heads to Broadford in Victoria on 14 April.


Source: MotoOnline.com.au

Privateer Pozniak shines in Wonthaggi Sprint races

New South Welshman leads strong privateer charge at the second round.

Image: Foremost Media.

Wonthaggi’s second round of the 2019 Pirelli MX Nationals saw KTM-mounted privateer Cooper Pozniak shine in the opening MX2 Sprint races, which the category experienced for the first time this season.

The New South Welshman rode strongly in the two back-to-back eight-lap outings, lodging a 3-4 scorecard for runner-up honours on the combined results sheet, which he later paired with a 13th place finish in the final moto for fifth overall.

Despite declaring his style isn’t suited to the shorter motos, Pozniak is relishing the results that have boosted his belief in just the early stages of the championship.

“I’m really happy with how those first two races went,” Pozniak told MotoOnline.com.au. “I put myself in a good position off the start in both motos and managed to get a third in the first one and a fourth in the second. I actually ran out of fuel in qualifying, so I was worried about that in the last few laps of the second one and just cruised around.

“I don’t mind the Sprint formats, but I’m really not spring guy – I get better towards the end of the motos. That’s why I was surprised with myself, because I never really go good in the first couple of laps in sprint.

“I just put myself in a good position off the starts and just went for it. I would much rather a 30-minute moto, so I’m looking forward to Broadford – I think I’ll do a lot better in them, and it will really show who’s fit and who’s not fit I guess.”

The MX2 division was littered with outstanding performances from privateer contenders, with Jy Dickson (KTM) and Sam Pelz (Husqvarna) winding up sixth and seventh overall, followed by Issac Ferguson (KTM) in 10th.

The premier class also witnessed standout rides from self-funded riders Erki Kahro (KTM) and Charlie Creech (Husqvarna), the duo landing in third and sixth respectively. Featuring in the top 10 were privateers Zak Small (Husqvarna), Jayden Rykers (Suzuki) and Jesse Dobson (Husqvarna) in positions seven, eight and nine.


Source: MotoOnline.com.au

Leather pants surprise MotoCAP ratings

In a surprise result, leather pants may be no safer than some denim riding jeans, according to the latest ratings from MotoCAP.

The world’s first safety and comfort ratings system for motorcycle clothing has found only one out of seven pairs of leather pants that rated four stars for safety.

Draggin Next Gen and Triumph Hero Riding jeans previously top-scored with four out of a maximum of five stars.

Of the seven pairs of leather pants tested, two rated three stars and four rated just two stars.

Leather pants in surprise MotoCAP ratings
Click here for the full ratings

Deakin Uni Institute for Frontier Materials Senior Research Fellow and Honda GB400 rider Chris Hurren says the leather pants were mainly marked down because of low impact protection, not abrasion resistance.

“The results show the need for a holistic approach to safety, including impact protection, as a number of products performed well in abrasion and burst strength tests, but fell short in impact protection, leading to lower overall ratings,” he says.

“Some would have been five stars if they just had impact protectors in them.”

Chris says many garments don’t come with impact protectors or only a few protectors.

“Some of the garments could be five star if they just had a full set of certified protectors,” he says.

“Then it’s the rider’s choice if they want to throw them away if they don’t want to wear them.”

As expected, leather pants didn’t rate well for thermal comfort with one pair scoring half a star and two pair top-scoring with just two stars.

MotoCAP advises riders to consider both the safety and comfort ratings when choosing the right gear for their ride.

MotoCAP scores

So far, MotoCAP has tested 18 textile and leather jackets, 18 pairs of jeans and leggings, seven pair of leather pants and eight pair of gloves.

These latest ratings mean they have now tested products in every class: gloves, leather jackets, leather pants, textile jackets, textile pants, ladies leggings and denim jeans. 

In the next few weeks MotoCAP will post ratings for more gloves, textile jackets and textile pants.

Chris says they will have more than 150 products on the website by June 30.

Motocap Motorcycle clothing rating system launched target
MotoCAP testing equipment at the Deakin Uni Geelong campus surprise

“We have purposely targeted only 10% of the market in the first year so that manufacturers have a chance to come along with the scheme,” he says.

“We do not want to put a manufacturer out of business as we want them to improve their products and think about protection and thermal comfort in their design.”

“If they follow this path like car manufacturers did for ANCAP then the rider will always be the winner.”

So far, not article of motorcycle clothing has been provided by a manufacturer.

All have been bought by MotoCAP using a secretive buying system to guarantee integrity.

Click here to find out how the pants were selected in secret.

Source: MotorbikeWriter.com

KTM RC16 ‘harder and harder’ to ride in Argentina says Zarco

Frenchman still finding difficulties in factory KTM transition.

Image: Supplied.

Johann Zarco says his Red Bull KTM Factory Racing RC16 became ‘harder and harder’ to ride at Argentina’s second round of the 2019 MotoGP World Championship on Sunday.

Admitting he struggled throughout the entirety of the 25-lap affair, Zarco battled his way well into the points, however a lack of energy in the closing stages saw him relinquish positions, crossing the line in P15.

“I struggled all the race and nearly hit Lorenzo at the beginning which almost put me in last place,” Zarco explained. “I had a good feeling in the first eight laps but could not pass my opponents and then it began to be harder and harder to ride the bike. I used a lot of energy to get in the points and was passed by two riders and in the end was lucky to get 15th position.

“It is difficult to have these kinds of races. At the moment I cannot ride how I want but will work to the maximum with the team to adapt to this condition. Later we will have more things to work on.

“Pol and Miguel had a nice race so if I can at least get close to them or be the first KTM will be some satisfaction but to get near the top we’ll need to do some other things. I want to keep as positive as possible and I know that all what we are going through now will make me stronger in the future.”

Zarco’s teammate Pol Espargaro experienced a much stronger weekend, placing 10th and was directly followed by class rookie and fellow KTM pilot Miguel Oliveira (Red Bull KTM Tech3).

Source: CycleOnline.com.au