Tag Archives: News

Kawasaki’s Patent For Electric Motorcycle With Swappable Battery

In a patent published in late March of this year, it was revealed that Kawasaki has been contemplating an electric motorcycle since as far back as 2013. The patent goes a step further than most entering this space of late however, as it highlights designs for a swappable battery unit.

The patent was originally filed on July 3, 2013, but didn’t come to light until March 27, 2019. The figures included with the patent clearly show Ninja bodywork, but the kicker is a detachable portion of the frame that would allow riders to change out a spent battery for a fresh one. Another figure shows the need for a stand to do this, so it’s unlikely the design would be a viable solution to range and charge-time issues while away from home, but it could be a useful prospect for commuters who start and end at home.

There has been no announcement from Kawasaki whatsoever about the prospect of a forthcoming electric motorcycle. However it’s only a matter of time before Kawasaki and others make a bid for market share in this burgeoning segment.

Another questionable aspect would be the strength of the frame itself. The patent describes a detachable portion of the frame that anchors to the static parts of the main frame, and that the detachable piece would be an integral part of the main frame. Stiffness for this detachable piece would be higher than the rest of the frame. The battery, when installed, would be supported from the bottom.

Up until now the electric motorcycle market has been dominated by relative newcomers to motorcycling. Zero is the most successful brand at this point, but Harley-Davidson is rolling out its LiveWire this year and Erik Buell has just announced the start of Fuell Motorcycles. There’s also Energica and Lightning Motorcycles making headway in the market.

We’re definitely interested to see if Kawasaki follows through on this project. Stay tuned.

Source: MotorCyclistOnline.com

Motorcyclist Alley Rally Video 2019

Sometimes the best motorcycle rides are right in your own backyard. That’s the premise of the Motorcyclist magazine Alley Rally. The event is a guided turn-by-turn tour through the center of Los Angeles by Editor-in-Chief Chris Cantle. The ride weaves through Cantle’s hometown and shows of some of the lesser known areas of this megatropolis.

RELATED: Motorcyclist’s Alley Rally Event In Photos

Riders remained connected via Cardo’s slick Packtalk Bold Bluetooth-enabled communication device. Smaller than a pack of cigarettes, the device easily affixes to most any motorcycle helmet and allows riders to talk to one another, in addition to manipulating their smartphone when paired.

From winding bends to beat-up dirt roads, this tour shows off some of the most obscure portions of the city. Beautiful murals and street art line many of the narrow corridors which help expose the diverse nature of California’s largest city. But don’t take our word for it, watch the video and see for yourself.

Source: MotorCyclistOnline.com

KTM’s Pit Beirer And Sebastian Risse Talk RC16 And MotoGP Development

Developing and fielding a competitive machine in MotoGP is no easy task. It takes years of track time testing, refining, and struggling after fractions of a second. It takes millions of dollars and numerous experienced technicians, engineers, managers, and riders. KTM knows these facts intimately, and we recently spoke to KTM boss Pit Beirer and KTM’s MotoGP Technical Director Sebastian Risse to learn more about the genesis of the RC16 and KTM’s MotoGP program as they mark the third season back in the big leagues.

“We have such a long tradition in off-road, so step by step we had to go through disciplines,” Beirer explains. “It’s not so long time ago that we had to start to do good things in Supercross in the US. That was definitely also a big milestone for us. Coming over here in 2010 and I found out that we were really representing KTM in the wrong way. Then we changed things, actually also to the point that we could cut Roger DeCoster over. So this was a really big and difficult thing to turn Supercross around. We didn’t even get proper parking in the Supercross paddock, and now lately we are winning championships.

“But then from there, this is of course by far the biggest challenge we took. We won quite many championships in different categories, but we went on in the street segment starting with Moto3. I have a really special relation to Sebastian because when we started on the street I was not responsible for roadracing, but then just in meeting at a certain time they told me, you are responsible from now also for the roadracing side. I was like, okay, wow. But things were not going so well. There was a team and things were prepared, but people weren’t so happy. Then I decided to stop with some technicians and give all the responsibilities to Sebastian.”

Risse was in his late 20s at the time, so faced a lot of pressure. But Beirer’s approach has been to put his faith in the younger members of his team. Not only to foster a respectful professional atmosphere, but to also show that the brand could elevate its roadrace profile with in-house talent.

“We did it in the first year because people told me I only know about off-road, and they told him that he’s too young. We said okay. We stepped in Moto3 as newcomers. Let’s learn together, because WP was new. The steel chassis was new. Us, we were also pretty new. So we said, ‘Okay, we need to learn now together and if things are getting better, we can grow together,’ but we won the championship in the first year.

“We didn’t know by that time, but without that project we would not have a MotoGP project because that’s when you really started to not outsource our roadracing program to somebody outside like we did in the years before. Then we said we do everything in-house with our young engineers. I was protecting them. I said, ‘They will fight until they win, but we need to believe in them and not say KTM can build great off-road bikes but on the street we will need an outside expert to run the team.’ Many of these guys from these days are still there, and they were the base for the MotoGP project. So from there we started to build up roadracing knowledge in-house. This mixed with some great engineers, and then also quite many guys from outside, that’s what is our MotoGP crew.”

Risse adds, “I think that’s also strong part from our CEO, Mr. Pierer. He really gives trust to really young engineers, even when he’s on the table. Some young people around, he will ask them their opinion. I think that was also a strong point in the last years; that also young engineers, they are allowed to bring their knowledge in and develop great motorcycles. We have some great older guys also there. So the mix between the young guys and experience is building great bikes. But here still we have to prove something. We are not there yet. We are just happy to participate and to survive every day.”

The faith is slowly paying off, with the RC16 making progress every time they hit the track. At Circuit of The Americas, where we spoke, times in FP2 were nearly three seconds faster than last year in the same session at the same circuit. The trick is to never feel satisfied, to always push forward for more.

“If you stand still in racing, they will pass you next day,” Risse says. “That’s also the crazy thing about racing. You always think you’re on the limit and from here we cannot go faster, but still every year you go faster and you find another second on a roadrace track on that level. It’s amazing. The guys are pushing so hard in that paddock, and all these young engineers are pushing so hard.”

Of course, the rider makes a huge difference as well, not only in their ability to ride the machine to its full potential, but also in terms of the direction of development. Some riders prefer to flow through corners, others prefer to jam hard on the brakes in a more point-and-shoot fashion. That makes a massive difference in the ways the bike progresses, and with four riders this year all bringing variations in style, KTM stands to make big leaps forward by Valencia.

“That was the biggest difference to last year and I think a big advantage, also a big challenge, especially on the tire side,” Risse explains of the expanded roster. “This is for me the most outstanding thing because when you have two riders and maybe one of them is injured or has a bad weekend, you have very, very limited amount of information, amount of data. The choice of the right tire and how to make these tires work is, especially in this class at the moment, number one, not only in terms of durability but also in terms of over-heating, treating it in the right way, not over-loading it, and so on. Then if suddenly you have the data of four riders, you can make big statistics and you can learn a lot from this. You have much more rider comments and in the end you can share this work because you need to sort out the tires. A lot of times when the conditions are not so constant maybe in two sessions, and then you don’t want to have this lucky punch for the race. You want to know what you’re doing. For this it helps a lot, for example.

“When you look at Pol (Espargaró), he’s really squeezing the bike to the maximum on the brakes,” Risse continues. “If I look at the data, I’m really scared. So he’s completely over the limit you think, but he does it, and he does it reliably and he’s not a crasher. So it is possible with a certain attitude and a certain feeling for the bike, but you have to let it really quite loose. If somebody doesn’t like to do that, already there the problem starts to have the right entry speed.

“Pol is on one extreme about V-shaping the corner, about stopping a lot in the last part of entry, preparing the exit very well. Then we have the guys coming from Yamaha on another extreme, focusing a lot on the entry speed. Then we have Miguel (Oliveira), kind of a wide paper who sucks up all this kind of information and tries to make the best out of this and gets a little bit of this, a little bit of that. You can see that this can also work very, very well, even with little experience. We try to feed him with information that he needs. He will tailor-make himself to our bike. Of course, when you only do this it can also mean that the bike moves into a direction that is maybe not perhaps optimum. But with the full package we have, I think it’s quite nice, helping out each other in every area.”

The opportunity in having four riders with different approaches is that it allows engineers to fill the gaps in knowledge that might otherwise exist with fewer or more similar riders. Johann Zarco, for example, is coming from Yamaha and immediately needed more confidence in the front end.

“The Yamaha is really a corner speed bike and an entry bike, so these were the areas where he was mainly struggling first before we adjusted the bike, confidence on the front, on brakes and entry. Then we were working on this, mainly with setting first to find the direction where you need to go, also with further developments. Then actually already during the winter break, we came to a point where he didn’t feel so bad anymore about this. For sure the Yamaha is more stable in some situations. The stability and then later on grip and turning were the points that he wanted to work on next. But it is iterative, so you solve one thing up to a point where you say, okay, this is not my main problem anymore. Then you go to another area and you improve this one, and then maybe the other one comes back. Not because you went back in the performance, but because you moved the limit. That’s racing. That’s all.”

The RC16 has, from the start, had massive potential. The machine was packing a powerful engine early on, which helps to alleviate a lot of issues when going up against more veteran machines.

“The engine was for sure our strong point in that phase. That’s clear. Also because other areas like the frame need iterations, need track time, while the engine is something where when you have very experienced people they can do this kind of steps in the background, in the factory, on the dyno, having certain development targets in mind so that we didn’t need a lot of iterations on the track, so they didn’t see them on track. But for sure a lot of hard work was in there to get to that point. Anyway, it was a strong and also very reliable basis which helped us a lot then also to improve the other things. Because what you don’t need is to have to change the engine every half day and to have problems here and there, but to have a basis where you can focus on the performance weak points of the bike.”

Where things could have gone awry is in the chassis, as KTM was and is the only team to run steel.

“Of course you can make a lot of benchmarking, look at different classes, put together what you think you know and start from there,” Risse says. “That’s what we did, and of course the starting point is anything but perfect. Then from there, it’s really not too much about concept and believing in this solution or that solution, but you have to just use what you have, follow the rider comments quite open-minded. I think then it’s quite independent of things like the material. It is about stiffness numbers. It’s about where you put the stiffness. Then on the stiffness number first to identify what you want to have, and on the other hand how you achieve it. So we have quite good knowledge in how to transfer our target to a frame that does it in terms of numbers. We have very good experience on the steel frame to produce this frame then. But to define the target is the biggest piece of the puzzle.”

“A huge piece of aluminum, we could not make a better frame,” Beirer adds. “It’s about that you know where you want the stiffness and how to put it there. Any material can do it. Then you still need to prove that you can build it in such a light, steel way that you are as light as an aluminum chassis. But, still, you need to know where you want to put the stiffness and how to put it there. Every garage wants to know from the other garage where the stiffness is, so it’s more about that.

“I think we know how to handle this material, but we still need to get more experience in how to do it. There was a question mark behind our suspension about our chassis, if we will ever make it. But in Malaysia, for example, from the race which was in the beginning of November we improved by more than a second to the test in February. So with that time from February, this was like Marc Márquez’s times from November in the race. So if you can build a bike in February which could be top three in November, from our position, if you look over to Honda and Marc Márquez, the level is incredibly high. But we are running still behind experience. These guys are building on many, many years of experience and we are just… Everything is new. Every day we do something that’s new.”

And even if it’s made from familiar materials, KTM’s MotoGP frame is anything but ordinary.
“We get the tubes from suppliers and even some production bikes have similar tubes in some points,” Risse explains. “But the way we build up the structure is quite different. On a racebike, normally you have quite a low front engine mounting point to have some lateral flex. On most of the production bikes you don’t see that except in supersport, superbike style. Then you have two engine mounts in the back which are basically also quite different to most production bikes because we are basically transferring the forces from the front. Part is through engine, part is through the frame.

“That means this is quite stretched out, while on most production bikes actually the swingarm is mounted either directly in the engine or it is kind of a hybrid system using also frame structure, but in the end it gets its strength a lot of times from the engine itself. So this concept is quite different to that. It also implies that actually the frame has to be more rigid and more loaded in this area. On the other hand, the way that you mount the engine when this is such a rigid structure has to be quite different. Normally, for example, when you look at production steel frames, they are kind of embracing the engine and you just clamp them to the engine. Now you have a stiffer structure, so you have to keep the engine between it but in a way that nothing is under tension. So there’s quite a bit of technology how you do this with engine spanner spacing out everything, how you tighten everything.”

Having your own in-house suspension company doesn’t hurt moving things forward either.
“The closer they are (WP Suspension), the better,” Risse continues. “This is just 300 meters so there is all the possibilities there to work together. Of course a big disadvantage is purely that the Öhlins guys have so many different bikes that they work on. Information, knowledge is transferred through the suspension company also between manufacturers, I believe. Of course this cannot happen when WP is just working with and for us. So we are kind of on an island that we have to develop together.”

But it all just takes time, and it’s clear that KTM has a solid approach. Will the brand take more podiums, or even its first win, this year? Unlike the past two years, we think it’s a completely plausible proposition in 2019.

Source: MotorCyclistOnline.com

Premier class debut a learning experience for Currie

News 24 Apr 2019

Premier class debut a learning experience for Currie

Factory Kawasaki rider lodges DNF-13 scorecard at British Superbike opener.

Image: Supplied.

Ben Currie has described his premier class debut at Silverstone’s opening round of the 2019 Bennetts British Superbike Championship (BSB) as a learning experience.

The Australian contender, racing for the Quattro Plant JG Speedfit Kawasaki outfit, qualified in P19 before crashing out of the opening encounter, which he believes came as a result of lacking patience in navigating through the field.

Rebounding in the race two, Currie displayed composure as he fought his way to 13th, notching up his first championship points of the season.

“I’ve learnt so much this weekend and my qualifying really set me back for both races,” Currie explained. “I think being on the grid so far back for race one caused me to crash as I was trying so hard to push forwards and probably put too much pressure on myself to try and get through the field.

“We started race two in 19th again, which made things difficult, but I paced myself and was a bit more patient this time and just dug deep and worked hard to get through the pack. I saved the tyre and we learnt so much, it was crucial to get that first race under our belt.

“I’m a little tired coming back from illness but I’ll be working hard on that over the next few weeks. I can’t thank my team enough for all their help and hard work this weekend. We have a good platform to build on and we know where we need to be and how to get there. Thank you to them all.”

Fellow Australians Jason O’Halloran (McAms Yamaha) and Josh Brookes (Be Wiser Ducati) experienced difficult weekends, both recording DNFs in the two outings.

Source: CycleOnline.com.au

Valencia host to first MotoE test on return from devastating fire

News 24 Apr 2019

Valencia host to first MotoE test on return from devastating fire

Spanish venue to serve up three days of testing in June.

Image: Supplied.

It’s been confirmed Valencia in Spain will host the first FIM Enel MotoE World Cup test on return from the devastating fire that destroyed the entire fleet of bikes and equipment at Jerez in March.

With the support of suppliers, Energica are expecting to have built all the machinery for the season in less than three months, while a rescheduled calendar was revealed earlier this month confirming the six-round series will continue to go ahead.

The Circuit Ricardo Tormo test in Valencia which will take place from the 17-19 June, the same track at which MotoE will now celebrate its season finale with a double header alongside MotoGP.

Primarily, the Valenica test will pick up where Jerez left off, with riders and teams focused on gaining experience with the bike and setup. Sessions will start from the grid for everyone to get to grips with race starts and grid procedures.

Subject to weather, the last day will kick-off with an E-pole simulation as riders test out qualifying with just one single fast lap at a time. The day will finish with a full race simulation, where riders will get a chance to practice overtakes and race strategy, with Energica awarding the winner with their very own motorcycle Energica Eva – the streetfighter model available for sale.

Simulating qualifying and a full race is useful not only for the riders and teams, but also for the organisation of the Cup in order to fine tune procedures ahead of MotoE’s debut at the Sachsenring on 5-7 July. Josh Hook is the sole Australian in the newly-introduced category, fielded by Pramac Racing.

Source: CycleOnline.com.au

Green and Gold MXoN ticket raising funds for Team Australia

News 24 Apr 2019

Green and Gold MXoN ticket raising funds for Team Australia

Fundraiser to assist the nation in travelling to Assen’s 2019 event.

Image: Supplied.

Motorcycling Australia (MA) is raising funds to assist Team Australia in making the journey to the 2019 Monster Energy Motocross of Nations (MXoN) at Assen in The Netherlands by raffling an exclusive Green and Gold ticket.

MA has introduced the fundraiser with a strictly limited 250 ticket release, with proceeds from all ticket purchases go towards covering team expenses and ensuring all selected riders receive the opportunity to represent Australia against the world’s best.

For the single price of $250, you can purchase a ticket that puts you into the running to claim the invaluable prize. Valued at over $10,000, the winner will receive two return airfares to Assen, five nights accommodation, airport and circuit transfers, two VIP Gold passes with Youthstream, and complimentary Team Australia uniforms and credentials.

The winner will be drawn at the final round of the 2019 Pirelli MX Nationals in Coolum, Queensland, on Sunday, 4 August. It’s also understood a selection coaching clinics will be introduced, hosted by the nation’s top riders in an effort to increase funding.

In 2018, Team Australia’s squad of Hunter Lawrence, Mitch Evans, and Kirk Gibbs finished just shy of the podium in fourth position. For more information on how you can purchase a raffle ticket or support Team Australia, visit www.mxonaustralia.com.au.


Source: MotoOnline.com.au

Brookes faces technical issues in Ducati debut at Silverstone

News 24 Apr 2019

Brookes faces technical issues in Ducati debut at Silverstone

Australian challenger forced to accept dual non-finishes at round one.

Image: Supplied.

Josh Brookes faced technical issues in both outings at Silverstone’s opening round of the 2019 Bennetts British Superbike Championship (BSB) last weekend, marking a difficult racing debut with the Be Wiser Ducati outfit.

Qualifying an uncharacteristic 18th, the former BSB champion fought through in each of the two encounters, making his way into the top 10, however an electrical fault saw his factory-backed Panigale V4 R come to a halt in race one, before a technical issue arose in race two, calling for a premature end to his weekend.

“There’s not a lot I can say about today other than it’s obviously disappointing to come away with no points,” Brookes commented. “But I wasn’t alone as Jason O’Halloran was another rider to have strong rides only to come away with two DNFs.

“That’s the nature of racing and you can have as many good weekends as bad ones so it’s a shame for the whole team that we didn’t finish either race. I think we showed the pace we have when everything’s going well, and we’re all motivated to do well as we know what potential we have but sometimes things happen that are out of our control.

“We’ve shown that we’re competitive against the other teams and know there’s plenty more to come so we’ll just forget about this weekend and look ahead to the next one.”

Josh Elliot (OMG Racing) and Tarran Mackenzie (McAms Yamaha) split race victories at Silverstone’s opener, the duo tied on points for the lead in the series rankings. The British Superbike Championship returns to action on 4-6 May at Oulton Park.

Source: CycleOnline.com.au

How to Keep Yourself Safe as a Motorcyclist

(Sponsored post)

Many people enjoy the exhilarating experience of riding around on a motorcycle. While it is an exciting way to get from one place to the next, the number of fatalities that occur as a result of motorcycle accidents are significantly higher than the number of fatalities that occur as a result of car accidents.

Even if you have a lot of experience with riding on your motorcycle, there are still several things you should do to make sure that you are being as safe possible whenever you are out on the road.

If the worst should happen and you do have an accident speak to the personal injury lawyers at The Dominguez Firm.

Use Protective Gear

Riding without the proper protective gear will put you at risk when you are on the road. Even the safest motorcyclists can get into accidents that are caused by other people, which is why you should never take that risk and should always play it safe by wearing the right protective gear. The helmet is one of the most important pieces of gear for you to wear as a way of protecting your head. Aside from the helmet, you should wear a reflective jacket to ensure that other people can see you on the road when it is dark outside.

Never Go Too Fast

It is easy to get caught up in the moment but driving too quickly will put you at an even greater risk of getting into a serious accident. Follow the rules of the road, stick to a steady speed, and do not go over the speed limit while riding your motorcycle. When you need to make a turn, try to do so slowly at first to avoid the chance of wiping out or hitting something during the turn.

Be Aware of Your Surroundings

Pay attention to the road and stay aware of your surroundings. You need to know that sometimes drivers are going to have a tough time seeing you when you are driving behind them or when you are on the side of them. Unfortunately, many motorcycle-related accidents are caused by a driver who did not see the motorcyclist, so trying to increase your visibility on the road is a necessity.

Stay Far Away from the Blind Zone

If a driver wants to switch from one lane to the next and is unable to see you, the driver could crash right into you, causing a huge and potentially deadly crash. Keep away from blind zone areas when you are riding your motorcycle to play it safe. You should stick closer to the front of cars that are on the road with you.

Keep Your Motorcycle in Good Condition

Never ride a motorcycle that is not in the best condition. You will need to check the tires and brakes while making sure that the lights are working properly. There are times when you may need to have the brakes repaired or the tires changed, but these are simple maintenance tasks that you can have completed in no time.

While it is not completely possible to avoid a motorcycle accident because there is no way to predict how another person will drive on the road, these are some of the precautionary measures you can take to increase your own safety. Colliding into a vehicle on the road could leave you with some serious injuries, including broken bones and brain bleeding. The last thing you should have to worry about is such serious and painful injuries when you are simply trying to have a good time riding your motorcycle, so make sure you put forth the effort to keep yourself safe.

Source: MotorbikeWriter.com

Stories Of Working Inside The Motorcycle Industry

The Entrepreneur

Court Butler, 40

What was your first job?
I was a truck driver for a construction company. Then I was working at a flooring store in Avon, Colorado, right down the road from where our offices are now. I was pretty bored.

So you quit and started making maps for motorcyclists?
I was still working at the flooring store. I was moonlighting, taking off to ride these roads. I actually got fired from that job. I can’t blame the owner. But my heart just wasn’t in it. I was 30 years old, and I didn’t want to sell flooring. When I got fired, it was this moment: Now I’ve got to shit or get off the pot.

Sounds scary.
We started in 2008, right as the economy was tanking. My wife owns a salon, and her income limped us along the first few years. When another business partner came in, Justin Bradshaw [who later launched the Rever app], we could afford to pay ourselves $1,000 a month. That was huge. I remember the first paycheck. We were so stoked! Because then it was more than a hobby. It became real.

And the product lets you get out and ride.
Our patented rating system highlights the best roads in each state. We don’t fly roads; we don’t get in cars. We scout roads on motorcycles. In the beginning, I would [study] atlases, and if there was any undulation, I would highlight it, throw it in my tank bag and go. My dad helped start the company too. As a son, getting to drag my father around the country over hundreds of thousands of miles—that was a fantastic experience.

How much were you riding?
Before we put out our first map, in 2010, we had ridden over 250,000 miles. I rode 55,000 miles the first year alone. Justin did 30,000 or 40,000. He was still painting houses at the time. It was a lot, managing our personal lives, our relationships with our wives, being gone all the time. That dance between not making any money and following a dream. People were like, “C’mon, are you serious? This is just an excuse to ride motorcycles around the country.”

There’s serious work involved.
It’s not hard to be envious of this position. But [scouting] can be taxing. You’re focusing on trying to keep the motorcycle upright, but also collecting data, double-checking maps, communicating in the field. At the end of the day, you’re smoked. Like, “Wow, I never thought I could be this tired.”

Could you see yourself doing anything else now?
No. I can’t. At this point, it’s less about the riding or revenue, and more about customers. Hearing people recount their experiences using our maps: “This is unbelievable. It’s changed our entire outlook on motorcycling.” That’s hugely rewarding, being able to say that our little map [helped] somebody on their motorcycle have an awesome time.

It’s like a Butler Map belongs to the motorcyclists. You just get to make the thing.
Exactly. Early on, your output dictates the company singularly, because you are the company. Then, at some point, it stops being about you. It’s about this community. Within that community, the paradigm has shifted. The traditional motorcyclists in this country, they’re not as interested in working to ride anymore. They just want to go and have fun on a motorcycle.

Dr. Michele Zasa

Clinica Mobile is the official medical group of MotoGP and FIM World Superbike. At the races, emergency services like ambulances are provided by the local area. We have a facility that travels with the series in Europe, and we send equipment and personnel for overseas races. We are the trusted doctors and physical therapists of the riders. So, we bring continuity and consistency [to their care]. I was inspired to do emergency medicine by ER, the television show; after my residency, I decided that I didn’t want to work in a hospital full-time every day for my entire career. So, for me, the best part of this job is variety. [Outside of Italy], we are not in our country. We are not in our hospital. It can be challenging, and I get to look for those solutions. Finding them and hearing the gratitude from patients—the riders—is very rewarding. And since I’m working with all these local doctors from around the world, I see how they do their job, hear their tactics, and learn their secrets. It’s a job where you never stop learning, and you never get bored.

Janelle Kaz

Bridging the worlds of motorcycle travel and wildlife conservation is one of my all-time accomplishments. My background is in biology, and [my work] focuses on protecting ecosystems. Besides habitat destruction, the illegal wildlife trade is widespread. Animals are kidnapped from jungles, sold in markets, kept as pets, used as tourist attractions, or reduced to body parts for displays of status. These trafficking networks are closely connected to other illegal trades, like [unpermitted] logging and mining, arms, drugs, even human trafficking. Being alone and in far-off places is a compelling way to talk about conservation to those who otherwise might not listen. And living on a motorcycle is inexpensive and allows me the freedom and capability to reach far-flung sites and research stations. This is not just a job. No one pays me. I share stories and photos in exchange for money, which I then give back to the projects I visit. I have no children, no home, no dependents. I am a true motorcycle gypsy. This is my passion, my life. I wouldn’t trade it for anything.

Kerry Sano

I’m the only employee [at my shop], so I wear a lot of helmets. I’m the service writer, parts department, customer service, mechanic. It works because I really love everything about bikes—riding, touching, fixing, tuning. I get rewarded by taking something that wasn’t great and making it better. It’s pride, perhaps. And the learning is constant. At the end of the day, maintaining a strong reputation for quality work, reasonable turnaround time, and good value is crucial to success in the moto repair business. It’s also inextricably linked to staying healthy and happy. I push myself to be on top of my work, but also to [have a] balance with soul-fulfilling activities. I like being my own boss and being accountable. I like being able to take whatever jobs I want. I don’t know [if my job is] the best in the world, but it’s up there. Who doesn’t want to be a bad bitch? Mistress of my domain, and I ride motorcycles to boot!

Michael Lock

I’ve always seen racing as a great way of telling stories. You get the most interesting people in racing because it’s not a real job. You can’t fail to fall in love with it. I don’t care that I’m in a small office in Daytona Beach, because this is where the action happens. We have a small team, we never have enough time or enough money. But this is real, and that’s the coolest thing. We are building this sport. We’re building the careers of the riders, we’re delivering value for the teams and manufacturers. At some point, people will look back and say: “Wow, that was a golden era for flat-track racing.” And we did it. Plus, I get to go and work in places that are off the beaten path. I get to meet people who come from different backgrounds. That’s all part of the rich tapestry of life. I get up every morning and I’m plotting the future of a motorcycle sport. How cool is that?

Matt Brady

I grew up in the Monterey area, so the track has always been my backyard. I’ve been coming here since 1974. We’d watch Kenny Roberts, who was just incredible. Seeing him leading the race, almost pulling a wheelie around the whole track—it was really something. And as teenagers, we’d hang on the fence, just wishing we could just get on the track somehow. Now I’ve done more laps around Laguna Seca than anybody in history—because I drive the track sweeper! I’m out at 6 a.m. because the track goes hot at 9 a.m. We need to clear everything: trash, debris, rubber from the tires, rocks from the gravel beds, GoPro cameras. I’ve found pistons. I’ve found a jellyfish. Sure, our crew watches [each racing incident] like, “Great, there goes another gravel bag,” or “Now we’re going to have to fix that tomorrow.” But it comes with the territory. It’s what this place is all about. The racetrack itself is iconic worldwide. I feel really privileged to have worked here all this time. I just love this place.

Justin Maxwell

I handle product management. That means I get to develop new bikes and ride them all around the world, meeting like-minded and passionate people along the way. As a motorcycle fanatic, it doesn’t get much better. It gives me [connections to] R&D, design, marketing, sales, customer service, and our global network of subsidiaries and importers. It’s very gratifying working with teams all over the world to develop the next line of products. I travel quite extensively, averaging 30 or 40 flights per year, which take me all around Europe, North America, Australia, Asia, and the occasional visit back [home] to South Africa. I can honestly say I only get bored when I’m on vacation. For me, it’s all about the satisfaction when it all comes together, seeing and riding the final product after years of development. I get to do my fair share of testing on prototypes. Still, nothing beats getting on the final product as it comes off the production line.

Steve Kuhns

In Defense of Keeping it a Hobby

Earlier this year, Alfredo “Fred” Juarez won Indian’s Scout Bobber Build-Off, a national competition for amateur builders. The mainstream recognition (and $10,000 grand prize) offered him an opportunity to break into the custom-bike industry. But the 35-year-old Texan, who works as a test engineer at NASA, ultimately decided to keep his day job.

“When I get home, I can just do,” he says. “I don’t have to ask for permission.”

Not that the idea of going pro hadn’t crossed his mind. Juarez always loved working with his hands; as a kid, he dreamed of building custom cars and motorcycles for a living. But a series of mentors encouraged him to pursue mechanical engineering and a more academic future. The Bobber Build-Off, the winner of which was determined by online fan voting, offered insight into what life would be like had he remained on his original path.

“Normally when I build things, I just do exactly what I want. This Indian competition was a little different for me,” he admits. “Knowing it was going to be judged by other motorcyclists kind of got me. I started thinking: I wonder what [the voters] would like? It was always in the back of my mind. And I can imagine applying that to—had this been my career—always having that stress of pleasing other people.” The experience was an affirmation of his current profession, and a reminder that sometimes labors of love are best taken at face value.
“I’ve found my niche in engineering, and I’m doing really well,” Juarez says. “At this point, building motorcycles is just about pleasing myself.” —Seth Richards

The Wrench

Keinosuke Sasaki, 45

You were born and raised in Japan. What did your parents do?
My mom was a typist, and my dad was a chef. He had this little room for crafts, like silver jewelry and woodworking. He tinkered with bicycles and always had a motorcycle. But I don’t remember them pushing me to get a certain job, or saying, “You have to be this or do that.”

How did moving to America change your perception of work?
I came here alone. No family, no backup. As an immigrant, I had to work harder, do the stuff nobody else wanted, because that was my opportunity to prove myself. I was young, didn’t know much, wanted to get out of my hometown. I romanticized the idea. It sounds cliché, but [that’s the appeal] of the American dream.

You made inroads with some iconic builders.
Even though [we had] different languages and cultural backgrounds, there was a common core, a passion. That makes it easier to connect. If you meet a fabricator or machinist, anybody who takes pride in making things—sometimes they don’t have to complete a sentence. You just understand. But mentorship isn’t school. They’re not getting paid to teach. If you don’t have their trust, they don’t share or show you anything. You earn the trust. My first job was to take the trash out. I was not told to do this, and I was hired as a mechanic, but there is no janitor at this shop. So, I’m going to sweep the floors and put tools away and organize parts. There is no such thing as wasting time on the job. Maybe in sweeping the floor, you find [a tool or part] that’s been missing. This makes another job easier to complete.

What did you learn starting a shop?
I don’t like the idea of having employees. That’s another job right there—managing them, not only operationally but financially. I am the owner of this business, and I clean the bathrooms. I’m down on my knees scrubbing the toilet. So, it became more of a “job.” But it’s my little shop. This is where I come to have “me time,” and I get to have it every day. There are no easy jobs around here. But at least they’re mine.

Do you have a routine?
I’m up at 6:30 a.m., here by 8:30 a.m., and stay until 6 or 7 p.m. It’s the same start and end, but the work in between is always different. [It can be] service and repair, which is satisfying to me, fixing things, making a bike run better. Or customizing and fabrication. I make from scratch, turn an idea from my head into reality. It’s tangible, touchable, and that’s satisfying. When customers see it and love it, that’s additional satisfaction, makes me smile. These tasks, working on a motorcycle, making things—they make me happy. I feel real happiness. So, I don’t need a vacation. People tell me, “I need to get away.” Going away gives me anxiety.

The Pro Rider

Debbie Evans, 61

You raced as a teenager, then became a full-time stuntwoman in 1980. Did you ever have a job that didn’t involve motorcycling?
I worked as a cashier at Petco. I was a delivery driver for a dental laboratory. That was in high school. I was sponsored by Yamaha, and teaching riding school on the weekends. I signed up for junior college, to get my general education credits and try to figure out what I wanted to do. I couldn’t believe my good fortune when a stunt coordinator called.

Are you still excited about going to work each day?
I remember when I first went to work [in Hollywood], they just had me riding motorcycles. Then someone handed me a sword. They said, “OK, now we want you to jump off of this embankment and swing the sword at this motorcycle, like you’re going to take the rider off the bike.” And I looked at them and said, “You’re going to pay me to play?” That’s how I feel. Sometimes I pinch myself. I love to go to work. I’ve stayed really young because I love what I do. Even now, I’ll see people from high school and think, Man, do they look old…

Talk about your worst day at the office.
Working on the movie Yes Man [in 2007], I was on a motor scooter doubling Zooey Deschanel. There was a stunt car, which was supposed to slide, but I saw it was coming in way too hot and way too deep. I was laying this scooter over, trying to get out of the way, but the car slid into me. The ball of my hip punched through my pelvis. I got knocked out, broke my hand, burns on my leg from the exhaust pipe. I spent 19 days in the hospital.

Do those moments make you reconsider what you’re doing?
No. It makes me reconsider what others are doing.

But you bounced back.
My goal was always to get back to work. When I finally got on set, after about a year, I had somebody on the hood of a car. I had to slam the brakes and pitch them into a camera without going too far or stopping short. I did it twice, like it was nothing. And I went, “I can’t quit. I love it. I can’t quit.”

How much of your identity is informed by your profession? What is Debbie Evans without motorcycles?
I do other things. I have kids and grandkids. But if you took away my stunt work, I think I would feel lost. I love the challenge. I get to look and say, “OK, how am I gonna make this work?” I just love that aspect of figuring it all out. It’s funny, driving the kids around in a Nissan Pathfinder, of course I would never even consider sliding a corner. But I’m thinking, if they gave me the same exact vehicle on set, I would flip the switch. I could make it work.

Do you have the best job in the world?
I feel like I have the best job in the world for me. Because not everybody can do the things I do. So, for them, another job might be the best job in the world. But this is something I was made to do.

I was born, and then I was on a motorcycle. That’s how I remember it anyway. I used to build ejection seat components and put shim kits together for brake-caliper spacers in my dad’s shop. I wouldn’t say it was child abuse, but I was definitely missing my Saturday morning cartoons. After growing up in the business, there’s nothing cooler you could end up doing. So, I took what I loved—racing, design, culture, art—and made that work in two wheels. I have a rule: If you want to get something done, pick up the fucking phone and make it happen. It took me a long time to learn that, but it works. And I couldn’t do just one thing; I have to continue [looking at] what’s next on a daily basis. That keeps me focused and working hard. Well, that and my kids. One is 2 years old, the other is 3 and a half. I’m taking care of things close to home right now. I wouldn’t change that for anything. Family comes first. But thank God I have a ­challenging job that I enjoy.

The Dream Doesn’t Always Last Forever (and that’s OK)

I’d seen plenty of bike cops, but never a motorcycle paramedic. Then I moved to England, and there they were: EMTs on high-end touring bikes, decked out with rescue livery and blue strobes and ozone-scratch antennas, rolling through town.

In my village, the head medic was something of a celebrity. Everybody called him “Flymo,” but his real name is Mark Hayes. Mid-40s, shaved head, built like an oak tree. I followed him on Twitter, along with the 8,000 other citizens; his feed was a steady drip of rescue helicopter selfies, gnarly accident scenes, offbeat memes, and shots of his kitted-out service bike at various cafes. He also went fishing on the weekends. Clearly, this guy had it made.

Did he ever. Mark’s day at the office went like this: Ride into the city center at 6:45 a.m., post up at a coffee shop, wait for a call. “When it comes, woah, it’s this buzz,” he told me. During a 12-hour shift, he might respond to a dozen incidents. “I get there first, and I’m immensely proud of that. I thrive on the pressure of working alone.”

Being on a motorcycle broke down barriers. He was an authority figure, but somehow more approachable, more engaged. More human. He seemed to know everybody, from the businessmen to the homeless, all by name. Occasionally, Mark would see someone that he’d resuscitated walking around town. Just knowing they were alive always brought a lump to his throat.

Not that every incident was so dire. Once, he arrived on the scene to find a troubled caller locked inside their own home. (They slid the keys through the letterbox; Mark charitably set them free.) Another time, the caller claimed to be in crisis but just wanted help putting their socks on. (“Not really an appropriate use of the emergency line.”)

I moved back to America years ago but still keep tabs on my former village. Recently, I heard the motorcycle paramedic unit had been shuttered. I called Mark, who confirmed the news. After nearly two decades as a bike EMT, he’s moved into an operations role for the local ambulance service. “You’ve got to embrace change, and my new position brings different sorts of challenges,” he said. “Of course, I miss being out there on two wheels. It was a passion. It gets in your blood.”

He still has the bike and the bizarre social media cult. And he has nothing but fond memories from his time working the best job in the world: “On a glorious sunny day, riding around, looking after the people in my community—there’s absolutely no feeling like it.” —Max Prince

Source: MotorCyclistOnline.com

Harley-Davidson Profits Down 27% in Q1: Trump Pledges to Gallop to Rescue!

After calling for a boycott against H-D last year because of the Motor Co’s plan to move some production abroad to avoid tariffs, President Trump now says the US will reciprocate against the EU tariffs that H-D blames for causing it to post a Q1 profit down 26.8%. This aggression will not stand, man.

Read all about it over here at CNBC.com, where there’s also a fun 4-minute video about Harley’s previous run-ins with tariffs and the POTUS dating back to the 1980s.

The post Harley-Davidson Profits Down 27% in Q1: Trump Pledges to Gallop to Rescue! appeared first on Motorcycle.com News.