Steed Rides Again for Veteran Suicide – This Time with a Crew

Ride for Light veteran suicide
L-R: Perry Steed, Jason Conyers, and Bruce Knobloch getting in some practice miles before their Ride for Light to raise awareness of veteran suicide.

Just because his first mission is complete doesn’t mean the battle is over for Perry Steed. In May 2022, the former Army paratrooper set out on his first Ride for Light, hitting 48 states on his BMW R 1200 GS and carrying the ashes of two brothers in arms. His goal was to raise awareness for the issue of veteran suicide. Two years later, Steed is taking a second Ride for Light, but this time, he’s kicking it up a notch, taking the show on the road – or more appropriately, making the road into a show.

Related: Veteran Takes a 15,000-mile ‘Ride for Light’

The 2024 Ride for Light will still be under the banner of Operation: Purpose, the 501(c)(3) that Steed set up to foster and nurture a community of veterans in Wilmington, North Carolina, which has a large military population. However, the ride itself is more about the larger epidemic of veteran suicide. And this time, Steed won’t be riding alone.

“We’re a blended crew this year,” he told me. “I’ve got my battle buddy who I actually grew up with. He and I joined the Army within a couple of days of each other. We had the same job, went through basic training and AIT (advanced individual training) together, and were at Fort Bragg together.”

Ride for Light veteran suicide
L-R: Perry Steed, Bruce Knobloch, and Jason Conyers.

Steed said Bruce Knobloch came to see him the night Steed’s oldest child was born, but after that the two men lost track of each other for almost 19 years until reconnecting this past summer.

Knobloch has been a motorcycle enthusiast for 20 years. When the two met up after all those years and the 2022 Ride for Light came up in conversation, Knobloch told Steed that he would’ve gone along if he had known about it.

“I told him, ‘Well, I’m doing it again.’”

The other addition to the crew is cinematographer Jason Conyers.

“When I got back from my 2022 ride, I joined the American Legion and became a Legion Rider because they really showed up and supported me,” Steed said, adding that one of the Legion Riders he met was Conyers, who was out of the Navy and had a film studies degree. “I was telling him what I was wanting to do, and he’s like, ‘Well, I’ll go with you, and I’ll document the whole thing.’”

Steed tapped some of his other resources, including a film studies professor at the University of Colorado and an art director for North Carolina PBS, who told him that once a documentary gets on one PBS station, the other states will pick it up.

“Of course, I gotta be censored a little bit,” Steed said. “I can’t just let it fly, but that’s fine.”

The 2024 Ride for Light began taking shape. There was just one glitch. On the 2022 Ride for Light, Steed had taken several opportunities to ride his GS off-road. This was something he wanted to do even more for the 2024 ride. When it came to Knobloch, Steed said if there was anyone in the high school yearbook with the caption “Least likely to own a Harley-Davidson,” it would’ve been Knobloch, yet that’s all he had owned since. He recently traded a CVO Street Glide for a Pan America. 

However, Conyers had a Low Rider.

“I told him, ‘You ain’t going with me on that bike.’”

Unsure what to do, Steed got on a call with a guy he met through some restoration work Steed had done on a 1961 BMW R50S. He told Steed “consider me a friend” and offered up business advice.

Ride for Light veteran suicide
1961 BMW R50S restored by Perry Steed.

“I needed someone who was not close to me that I could run some of this shit by, because everything I say, people are like ‘Yeah, man, that’s a great idea.’ I know not all my ideas are great, and I need someone who will tell me, ‘That’s freakin’ stupid.’”

During the phone call with Sean Slovenski, Steed explained Operation: Purpose and the Ride for Light, and in a stroke of good fortune, Slovenski donated two bikes: a 2010 BMW R 1200 GS with just 15,000 miles on it and a 2009 BMW R 1200 RT.

“He said, ‘Do whatever you want with the bikes,’” Steed said, adding that Slovenski recognized that the RT didn’t necessarily fit with the trip. Slovenski told Steed he could sell it to help fund the trip and that Conyers could ride the GS.

Related: Perry Steed | Ep. 52 Rider Magazine Insider Podcast

With the bikes lined up, the trio set a launch date for May 18 from Beaufort, South Carolina, after they attend an event with Operation Patriots FOB, a veterans and first responders support group.

Ride for Light veteran suicide
Working with Bruce on his bike, adding Denali D7 lights and a few other parts before the trip.

Steed told me the plans for the ride with a mix of excitement and reverence for the places they’ll be riding and visiting.

They’ll start with the South Carolina Adventure Route – or SCAR.

“We’re gonna ride part of that from Beaufort up to Suches, Georgia, and then we’ll head backcountry through Tennessee and Kentucky to get up to Louisville,” he said, adding that the good thing about the SCAR for someone without a lot of off-road riding experience like Conyers is that it’s mostly just two-lane road. “There’s some dirt and gravel, but nothing crazy.”

However, he said the real exciting part will be the BLM land out West.

Ride for Light veteran suicide
Jason’s BMW GS in a little deeper than expected.

“You know, really getting off the beaten path, out to where there’s no lights, no light pollution, and it’s just us out there. Three guys, talking smack and eating and sleeping under the stars.”

As for their on-road plans, Steed said they intend to visit a variety of places, from veterans cemeteries to a speaking engagement at an American Legion nursing home in Minnesota to the location of a large parcel of land that is being turned into a veterans retreat by a family who lost their son to suicide.

As with the first trip, they’ll be carrying the ashes of veterans.

“There’s a really horrible statistic that I want to lay on you that will blow your mind,” Steed told me. “There’s over 3,000 unclaimed veteran remains every year. A lot of these guys – very often Vietnam vets – through whatever happens, when they die, no one is able to locate the next of kin.”

Steed said there is a nonprofit organization in Wilmington called Veterans Memorial Reef that takes ashes and inters them in an artificial reef 5 miles offshore.

“I told them I would pick up whatever I can carry along the ride. So I’m leaving room on my bike for that.”

But as Steed said in 2022, this isn’t a trip about death. It’s a trip about life, so along the way, they’ll make “buddy checks” with as many other veterans as possible, spreading hope, love, and camaraderie.  

That’s the most important aspect of the ride, and Steed said even if they don’t end up making a documentary, he just wants to get these two other guys out on road.

When I first connected with Steed in 2022, he was already a couple months into his ride and had stopped in Mexican Hat, a small town in southeastern Utah that was a favorite place of his father-in-law, an important figure in Steed’s life.

When I called him this time around to talk about Ride for Light 2024, he said that just the night before, he had been replaying in his head that conversation we had almost two years ago.

“I was thinking about where I was at. I see constant reminders when I’m in my office, these little mementos from my trip, and I remember exactly where I was.”

Steed said that Conyers has been fortunate in that he’s done a few cross-country trips – but not Knobloch.

“Every veteran needs to see and experience what they fought to preserve,” he said. “I need to get these guys out on the road…and get myself back out there too.”

To learn more about the Ride for Light 2024 or to donate to the cause, visit the Operation: Purpose website or follow on Facebook.

Resources:

If you or someone you know is in danger because of suicidal thoughts or actions, call 911 immediately. Suicide is an emergency that requires help by trained medical professionals and should always be treated seriously.

Nationwide suicide hotlines, 1-800-SUICIDE (1-800-784-2433) and 1-800-273-TALK (8255), have counselors available 24/7. Other resources include Suicide.org, the American Foundation for Suicide Prevention, and the American Association of Suicidology. All provide comprehensive information and help on the issue of suicide, from prevention to treatment to coping with loss.

The post Steed Rides Again for Veteran Suicide – This Time with a Crew appeared first on Rider Magazine.

Source: RiderMagazine.com

Bondi ready for WorldWCR battle, training partner Zarco “one of the best in the world”

In 2024, French rider Emily Bondi is preparing for her second season in motorcycle racing, making the step up from her national championship—where she won the 600cc Women’s Cup on her debut—to the new FIM Women’s Circuit Racing World Championship. As the start of the new Championship draws nearer, Bondi attended the French GP at Le Mans, where she met a growing fanbase and caught up with fellow French riders Johann Zarco and Fabio Quartararo.

“IT’S AMAZING TO BE ON THE WORLD STAGE” – can Bondi convert previous success in 2024?

Speaking about what it means to participate in the inaugural Women’s Circuit Racing World Championship, Bondi shared the excitement of many: “It is a very important thing for me. It is amazing to be on the world stage since it’s only my second year of racing. To be with those women, the best in the world here on the world stage for the first time, is very important. Also, to be a reference for all the women who want to do some racing and motor racing, is also very significant for me. It’s incredible to get here just in the second year of my adventure.”

Preparation is always vital in motorcycle racing, with Bondi getting ready to take to the track against her rivals at the forthcoming Cremona test despite an injury: “Preparation is a very important thing and to be honest, I already began in January, so it’s been a few months that I know the R7 and have been preparing myself mostly for the entire season—not only the Cremona test. I know this bike; I couldn’t do much more to be honest. I know I will be OK despite the injury. I’m happy to be back on the bike very soon, which is great.”

“I GOT IN FRONT OF A HUGE CROWD!” – a popular figure in France

Speaking from the French Grand Prix at Le Mans, she was able to enjoy the warmth of the record-breaking MotoGP™ audience of over 295,000 across the weekend: “On Friday, I was able to go to the fan zone. I got on stage in front of a huge crowd, which was a first for me! The people’s reaction was amazing, and I now have a lot of support—not only from the women but from the French motorcycling fans community in general.”

“I HAVE A GREAT RELATIONSHIP WITH ZARCO… HE’S COACHING ME” – a special training partner

One of the key topics for Bondi’s preparation has been that she trains with the likes of MotoGP™ Grand Prix winner and double Moto2™ World Champion, Johann Zarco: “Obviously, when I became interested in MotoGP™, I started to follow them because they are the top French riders. I had the chance to meet them both and have formed a good connection with them. I have a great relationship with Johann Zarco as I often ride with him. He’s coaching me, helping me a lot on the mental side of things and then on the bike. It’s very important to me to have the support of a rider like him and to get his advice, as he’s one of the best in the world.”

EVERY SECOND LIVE: watch all the action from 2024 and beyond with the WorldSBK VideoPass!

Source: WorldSBK.com

Carrasco readies for inaugural WorldWCR test: “Everyone is trying to push the female riders”

Ana Carrasco (Evan Bros. Racing Yamaha Team) is one of the big names in the inaugural FIM Women’s Circuit Racing World Championship, with new opportunities arising to bring more diversity and inclusivity within the sport. This brand-new Championship promises to deliver excitement from the start and we caught up with Carrasco herself about this new chapter.

“IT’LL BE INTERESTING TO SEE AT CREMONA WHO THE BEST RIDERS ARE” – a new era dawns

Giving an overview of the Championship, Carrasco said of the positivity that comes from it: “The Championship is a very positive idea; it’s important that Dorna and the FIM tries to help all female riders. We’re not many and it’s important to get that help. For me, to be in this Championship was also important because for the first time ever, everyone is trying to push the female riders. I’m one of the top female riders around the world so I think it’s good for me to try and be in the Championship in this first year. It’s important that the Championship has the biggest level possible.”

Discussing the line-up, it will be fresh competition with new rivals emerging for the 2018 WorldSSP300 Champion: “The line-up will be interesting; I don’t know almost any of the riders because they come from different countries! It’ll be interesting to see at Cremona who the best riders are. I think it can be a good Championship if we are very fast. It’ll be a good Championship with a lot of fights. I see the Championship as a good platform to try and have some riders with good level and then move onto other classes inside the Champìonship. I think it’s a good idea.”

“IT’S IMPORTANT THAT TOP TEAMS PUSH WorldWCR” – synergy cascades through WorldSBK paddock

The Yamaha R7 will be the bike for all riders, with the Murcian rider talking about the style and also her Evan Bros. team: “It’s a step between 300cc and the 600cc, so it’s a good bike to do the Championship with. Almost every rider is coming from 300 so this is the best option so everyone adapts to the bike as fast as possible. The bike is very good; I’ve tried it at some tests at home and it’s quite big and good fun. The riding style is similar to a 300cc; the power is between a 300cc and the 600cc but the weight is more of a 600cc. You’ll have to be fast in the corners to not lose the speed.

“I’m so happy to be with Evan Bros. because it’s one of the top teams in the paddock; they have a lot of experience in WorldSSP so for me, it’s important to be in a team that I can have room to improve and try and move into WorldSSP. I’m happy to be in the team and I think it’s important that some top teams in the Championship are pushing the WorldWCR a lot because they have a lot of experience and they will help it grow faster.”

“AFTER THE TEST, IT’LL BE EASIER TO SEE WHICH RIDERS ARE ON TOP” – vital test at Cremona awaits

Looking forward to seeing who the main competition will be, the Cremona test will be vital for the 27-year-old: “I only know the Spanish riders; the others, I’ve never been on track with them. After the test, it’ll be easier to see which riders are on top. It’s a new circuit for almost everyone so it’ll be good; we’ll test the bikes there, the team and being on a neutral track will be good to see exactly what the level is. If you ride a lot in one circuit, maybe you’re quick but then, it changes. It’ll be a good place to do it.”

“THE WorldSBK PADDOCK IS LIKE HOME” – Carrasco back to make more history

With so much success before, Carrasco comes back to the paddock in which she’s enjoyed some of the best moments of her career: “I’m really happy because the WorldSBK paddock is like home; I spent the best years of my career here and it was important for me to come back here. I was two years in MotoGP™ and it was good but I was trying to come back here. I feel very good here and for a rider, it’s important to feel like you’re at home to give your best. I’m happy to be here and I hope to stay in the Superbike paddock a lot of time.”

EVERY SECOND LIVE: watch all the action from 2024 and beyond with the WorldSBK VideoPass!

Source: WorldSBK.com

IN-DEPTH WITH TROY CORSER – PART 1: Toprak and Haga “similar”; aims to help more Australians

Three rounds down and the 2024 MOTUL FIM Superbike World Championship is well and truly alive, although a famous name from the past popped into Assen, with Troy Corser being one of them. The double World Champion discussed helping more Australian riders on their path to success, reflected on his own career and compared one current star to an old rival from days gone by.

A NEW GENERATION OF AUSTRALIAN TALENT: why is Troy Corser back in the WorldSBK paddock?

Starting with an obvious topic of why exactly Corser is in WorldSBK environment once again, he stated his work with Cameron Swain in the FIM Yamaha R3 bLU cRU World Cup: “The main reason I am here is to help Cam Swain in the R3 Cup. He won the championship in Australia last year and after his wildcard at Portimao, he got some good results and some good contacts and they asked him to come back. I’m hoping to do most of the races if I can but it’s up to the family, as usually his dad comes along with him. He’s an ex-rider himself as well but I’ve asked if I can come to give some more professional help at the track and so far, it’s working well.”

“IT’S ALWAYS NICE TO HAVE A FAST, COMPETITIVE TEAMMATE” – Corser on being next to Fogarty

Pressure or motivation? The Australian reflects on his steep learning curve with a Champion teammate next to him: “There were positives and negatives actually as I knew that I had the same material as Carl and the factory behind me; then, I had the pressure that I wanted to be as good as my teammate who is the Champion, so you have to be at the top. I learnt a lot from those early days and it’s always nice to have a fast, competitive teammate. You can work off of each other; back then, we didn’t work with each other too much but now teams are starting to do that more to develop the bike – BMW are a perfect example. Racing is a lot different now compared to the 1990s.”

THE FIRST TITLE IN 1996: “It was great to win at home in Australia”

With Carl Fogarty leaving Ducati for Honda in 1996, Corser was looking to go one better than his 1995 campaign: “I guess I was also the #1 rider for Ducati in 1996 because Carl won it 1995 and I was second but he’d moved away, so I was the highest Ducati rider from the year before. Although we were a ‘satellite’ team, we were the ones who were going to get results for them so they gave us extra help and the attention was focused to us a little. We actually had Claudio Domenicali working with us closely as an engineer at the time! He could see that we had potential, also Davide Tardozzi, so we had the full package. It was also my second year and I knew all the tracks so it was the year to win it and we did it.

“If Aaron had finished in front of Anthony then the points would have been different in the last race. You never know what could happen in racing; perhaps the bird would have missed me in the second race and it was just by chance that it hit me. When I threw it, it could have hit Colin Edwards and could’ve have crashed or whatever. It’s all part of racing, you take it on the chin but it was great to win at home in Australia in front of all the family and friends.”

“YOU ALWAYS FELT SAFER WHEN YOU COULD SEE NORI IN FRONT OF YOU!” – Corser’s toughest rival

“Me and Nori had lots of close races actually, as teammates and competitors,” started Corser, who shared the garage with Haga in 2007 and 2008 at Yamaha, after many years going head-to-head, particularly in Corser’s early Ducati years. “That’s how racing was back then. We respected each other anyway and it was never an intentional shove off the track or crash into somebody. In our day, we’d have three fast laps at the start, a steady part in the middle and then a fast end to the race. Now it’s fast from the first lap to the end! We had great times in racing back then but now, it’s just a different level.”

A rivalry that spanned three decades of WorldSBK, Corser reminisced about old foe ‘Nitro Nori’ Haga: “My toughest competitor and teammate was Haga. It wasn’t that we didn’t get on but because the bikes were so close, we raced quite close – as in he was touching my tyres from behind! You always felt safer when you could see Nori in front of you than when you couldn’t work out where he is. Then you’d feel a nudge and you’d be like, ‘ahh, there he is behind you’! Frankie Chili was also tough on the track. He was great off the track but when the visor went down, he was a different rider. Carl was tough too but everyone was a rival back then! At the same time, we’d all meet up and have a beer at a hospitality party and if they won, you’d have a beer with them and if you won, they’d come to you. There were so many different characters back then and there still is now!”

MODERN DAY VERSION: “I’d put Toprak and Nori as very similar… it comes from pure rider ability”

Speaking about whether a hard-charging Haga’s style can be compared to Toprak Razgatlioglu’s (ROKiT BMW Motorrad WorldSBK Team) tenacity, he assessed of similarities: “Toprak’s bike control allows him to do what he does, whereas with Nori, although he looked out of control, it wasn’t often that he crashed and he was within his limit. I think he was on the limit sooner than most of us and perhaps he had to ride a bit more like that because of the bike or the tyre. I’d put Toprak and Nori as very similar but a lot of it comes from pure rider ability and natural talent. Both came out of the blue from nowhere in a way and then they were at the front.”

TO THE FUTURE: “I’d like to bring on Australian riders”

“I’m enjoying working with younger riders, passing on my knowledge and experience on the bike but also mentally and preparation, said Corser. “Unless you’ve done what I’ve done, you can’t do it. I have the connections with all the manufacturers in the paddock so having that toolbox to work with, I’d like to bring on Australian riders. It’s shortcutting the learning period and if you learn from the best, then you’ll get the information sooner. You want to give them the right advice and the right help.”

CAREER REGRETS: “I should’ve stayed in WorldSBK; perhaps the Sugo crash wouldn’t have happened”

Speaking of whether or not he had any regrets in his career, there were a couple: “I only have two: one was when I crashed at Sugo in Warm Up in 1998 and I regret that I wasn’t more experienced then and had just picked the bike up and ran off the track. I was still quite young then and I panicked a bit and then ruptured my spleen. I was so young and hungry but then I suffered the consequences. The other one is moving from WorldSBK to 500cc in 1997. I should have stayed in WorldSBK and if I had, perhaps the Sugo crash wouldn’t have happened.”

EVERY SECOND LIVE: watch all the action from 2024 and beyond with the WorldSBK VideoPass!

Source: WorldSBK.com

2025 KTM 990 RC R Prototype Announced

2025 KTM 990 RC R Prototype
2025 KTM 990 RC R Prototype

In KTM’s current lineup, the only street-legal, track-focused sportbike is the RC 390. The RC 8C is a track-only, homologation special limited to 100 units. KTM hasn’t offered a street-legal, liter-class supersport since the 1190 RC8, which was produced from 2008-2015. But starting in 2025, the KTM 990 RC R will fill that hole in the lineup. Read KTM’s full press release below for the inside scoop. Click here for details as well as the first episode in the 990 RC R documentary series.

Related: 2024 KTM 990 Duke Review | First Ride


2025 KTM 990 RC R Prototype
2025 KTM 990 RC R Prototype

KTM Roars Ahead: Unleashing the Dominant KTM 990 RC R Range

The KTM 990 RC R, which is set to roll off the Mattighofen production line in early 2025, has a dedicated Supersport persona but will be homologated for street use, catering to the desires of orange enthusiasts fixated on track days and individuals seeking to maintain the adrenaline rush with an exceptionally capable street bike. The all-new development embodies the fusion of Austrian engineering excellence and the ferocious racing DNA, delivering unrivaled performance while embracing the practical demands of the road.

The 990 RC R will excite enthusiasts with its street homologated model, but its race DNA will be intentionally unveiled in early 2024 in the form of a prototype, making appearances as a wildcard entry in non-point scoring outings across select European Supersport series, igniting anticipation among fans. KTM believes in developing this newcomer to their stable in the most READY TO RACE way possible – through racing.

2025 KTM 990 RC R Prototype
2025 KTM 990 RC R Prototype

KTM is also filming a multi-part behind-the-scenes documentary about the R&D journey of the bike and its entry into the Supersport sector. This exclusive behind-the-scenes content will give viewers close, and not usually seen, insights into the fast-paced world of the Austrian-based factory and what it takes to craft a motorcycle from an idea into reality. Follow the final stages of the research and development process moving all the way from the very beginning to the final unveiling of the finished street homologated version of the 990 RC R. Click HERE for the inside scoop.

2025 KTM 990 RC R Prototype
2025 KTM 990 RC R Prototype

KTM 990 RC R: The Purpose

Over the last fifteen years, KTM metered sport-orientated road products to the public at a time when the company was extending its off-road racing prowess to the asphalt: the KTM RC8, the KTM RC 390 and the track-only, limited edition KTM RC 8C were the prime examples.

Across that period KTM has merged R&D, learning, and roadracing accomplishments at a rapid rate. The company now caters to motorcyclists seeking a machine born from competition yet engineered to be the ultimate, advanced street tool. The search to minimize hard compromises brought on by overly sporty ergonomics and handling is over. The 990 RC R has been years in the making and with a wealth of data garnered by titles and trophies in almost every category of various MotoGP categories. The bike represents the natural evolution of the current KTM RC line-up, yet its sporting potential allows for a straightforward conversion into a 990 RC R TRACK edition. True to the READY TO RACE ethos, this edition is poised to make its debut in the second quarter of 2025.

2025 KTM 990 RC R Prototype
2025 KTM 990 RC R Prototype

KTM 990 RC R: The Product(s)

The street homologated 990 RC R boasts an LC8c powerplant, honed for rasping torque and horsepower, pumped out through the new ergo-crafted and condensed stainless steel muffler and fettled through a shifter that can be reversed to race-shift as standard.

The steel frame has been engineered for dynamic performance, with increased weight bias towards the front end. It features a dedicated steering head angle of 25 degrees and offset for enhanced steering responsiveness. Beefed-up stiffness gives the right feel and stability under acceleration on bumpy roads or on racetracks while also maintaining agility, especially at low speeds. A diecast aluminum subframe contributes to the ride.

Ergonomics are key to the 990 RC R’s behavior. Lengthy experimentation primed the six contact points on the tank for a better connection, leaning and ‘tucking in’ to ensure comfort but also support for knees, arms, and lower pressure on the hands. A new fuel tank has been shaped as a main component of the ergo. Adjustable footrests play a part, as well as the fully adjustable WP APEX Open Cartridge Suspension and light weight cast aluminum wheels wrapped in Michelin tires.

The MotoGP heritage is evident with the wind-tunnel-chiseled aero wings that provide stability for braking and cornering and other edges and profiling around the bodywork that screams ‘racer.’

If there were any lingering doubts about the bike’s intended purpose, the minimal modifications required for the transition to the KTM 990 RC R TRACK edition should indisputably reinforce its racing pedigree. Crafted by KTM in their Austrian factory, the modifications strip away the road-legal essentials, incorporate protective components, fine-tune adjustments, customize further, and revise racing bodywork, including a full exhaust system. These modifications ensure that riders focus on lap times rather than leisurely rides. Additionally, the ease of repair, low maintenance requirements, and extensive official dealer support provide further advantages.

KTM 990 RC R: The Promise

“The KTM 990 RC R is a groundbreaking innovation for those who live for the thrill of cornering. It’s for those who lean close to the road, almost brushing their knees, and then push the limits, dragging elbow to the tarmac on the racetrack. This bike offers power and prestige without the exorbitant price tag. At last, we can unveil our KTM 990 RC R and introduce a truly exceptional motorcycle to dealerships in early 2025, fulfilling the anticipation of countless riders and race enthusiasts. Our Duke range and other street products have garnered a loyal following for their distinct character; we believe the KTM 990 RC R will quickly attain cult status because it excels at the two things it was designed for so remarkably well. Success will be evident on the track, but the unparalleled experience for customers on the road will truly set it apart.” – Riaan Neveling, Head of KTM Global Marketing

The countdown to early 2025 starts right now. Follow the final stages of development in the special documentary video series by clicking here.

Check out more new bikes in Rider’s 2024 Motorcycle Buyers Guide

The post 2025 KTM 990 RC R Prototype Announced appeared first on Rider Magazine.

Source: RiderMagazine.com

BMW Motorrad Unveils Automated Shift Assistant

BMW Automated Shift Assistant
BMW Automated Shift Assistant

Motorcycles equipped with quickshifters, which allow upshifts and downshifts without using the clutch, have become commonplace in the last few years. The BMW Motorrad Shift Assistant Pro is an optional quickshifter on many BMW models, including the new R 1300 GS, the M 1000 XR, and many others. Even with a quickshifter, riders must use the clutch to pull away from a stop. BMW’s new Automated Shift Assistant eliminates the need to use the clutch at all, and it will be an option on R-series models powered by boxer Twin engines. Read the full press release below.


With the new Automated Shift Assistant (ASA), BMW Motorrad presents an innovative technical solution that makes riding simpler and more comfortable. True to the motto “Simplify your ride,” the riding experience is enhanced by automation of the clutch and gear shifting process, without sacrificing the emotionally important dynamics of shifting.

The Automated Shift Assistant features a clever functional design in which two electromechanical actuators automate the clutch and gearshift of the six-speed transmission, which is the main difference to a conventional shift assistant. There is no need for a hand lever to operate the clutch manually. Starting, stopping, and maneuvering are all made easy with the Automated Shift Assistant.

BMW Automated Shift Assistant
BMW Automated Shift Assistant

Riding with the Automated Shift Assistant becomes more enjoyable thanks to fast, precise, rev- and load-adapted gear changes. The rider’s workload is reduced, which makes riding more enjoyable. In addition, the Automated Shift Assistant creates a more direct connection with the powerful boxer engine, as the precise clutch actuation makes it easier to control the riding experience via the throttle and gearshift lever.

In ‘M’ shift mode, gear changes can still be made by foot control, allowing the rider to decide when to change gears.

In ‘D’ shift mode, the Automatic Shift Assistant really comes into its own. Shift points are automatically selected by the engine control unit. In both “M” and “D” modes, the rider benefits from smooth and perfectly executed gear changes, resulting in efficient motorcycle acceleration and increased riding stability.

BMW Automated Shift Assistant
BMW Automated Shift Assistant

When shifting up, for example, the possible jolt associated with a classic manual transmission with a manual clutch is largely eliminated, as is the risk of helmet-to-helmet contact between rider and passenger.

Downshifts are also designed to be as smooth as possible, minimizing chassis disturbances. Specific characteristics of the automated shift function are assigned to the different riding modes to ensure perfect shift behavior in each riding situation. In combination with Active Cruise Control or front collision warning, the networking of functions brings the future of motorcycling to life.

Automated Shift Assistant: Automated clutch and gear shifting for a new riding experience.

In difficult riding situations, using the clutch and throttle takes a lot of concentration. If you are travelling with luggage and perhaps a passenger, using the clutch and gearshift takes up resources. The rider remains in control and has more freedom in every riding situation with the Automated Shift Assistant. Riding becomes a more relaxed and enjoyable experience.

BMW Automated Shift Assistant
BMW Automated Shift Assistant

The torquey boxer engine enables almost effortless starts on uphill gradients, for example, thanks to automated clutch operation, which also pays dividends in terms of better vehicle control off-road or on difficult surfaces.

Riding pleasure takes on a whole new meaning when you choose the automated D mode. Optimally selected gear changes create a new riding sensation. The right gear is automatically selected according to the rider’s individual riding needs, resulting in a harmonious and extremely smooth driving experience.

Automated Shift Assistant: Electromechanical clutch and gearshift actuators combined with sophisticated electronic controls.

The Automated Shift Assistant is the logical and technical evolution of the BMW Motorrad Shift Assistant Pro. Two electronically controlled electromechanical actuators operate the clutch and gearshift, enabling easy starting and automated gear changes. The rider’s shift request is transmitted to the control unit via a gearshift lever sensor, which is actuated by the conventional foot-operated gearshift lever. Additional sensors determine the revs of the transmission input shaft and the clutch position. These values are transmitted to the

TCU (Transmission Control Unit), which is closely linked to the engine control unit, for control of the clutch and shift actuation.

The clutch is operated by an electro-mechanical actuator combined with a hydraulic system with a direct hydraulic connection between the clutch master and slave cylinders. The actuator regulates the required clutch slip, engages the clutch when changing gear and disengages it when stopping.

In manual shift mode “M”, the rider can move the gearshift lever in the desired direction in the usual way. If the revs in the desired target gear are within the maximum or minimum rev range, the shift is made directly. If the engine revs fall below a gear- dependent minimum speed, downshifts are performed automatically in manual mode. This prevents the engine from stalling.

In shift mode “D” the gears are changed automatically depending on the riding mode, engine revs, throttle position and lean angle parameters. Gears are shifted according to the riding situation and dynamic requirements.

The benefits of the Automatic Shift Assistant (ASA):

  • Completely eliminates the need for the rider to operate the clutch.
  • Dynamic and comfortable gear changes for more riding pleasure.
  • Choice of manual or automatic gear shifting.
  • Automatically adapts gear shifts to the rider’s dynamic preferences in D mode.
  • Eliminates the possibility of engine stalling during gear shifts.

Check out the latest bikes in Rider’s 2024 Motorcycle Buyers Guide

The post BMW Motorrad Unveils Automated Shift Assistant appeared first on Rider Magazine.

Source: RiderMagazine.com

DATES FOR YOUR DIARY: in-season testing plans in WorldSBK’s 2024 season

Whilst the 2024 MOTUL FIM Superbike World Championship battle continues to rage after three rounds, doing important homework will be just as vital to try and gain an advantantage on rivals. Although the season is underway, there will be plenty of tests to come during the season; we list them below and will keep them updated throughout the year.

 

  • March 14th – 15th: Circuit de Barcelona – Catalunya; WorldSBK – COMPLETED
  • May 16th – 17th: Cremona Circuit; Inaugural WorldWCR test – PREVIEW
  • May 23rd – 24th: Cremona Circuit; WorldSBK
  • May 30th – 31st: Misano World Circuit “Marco Simoncelli”; WorldSBK

2024 IS UNMISSABLE: enjoy all the stories, drama, emotion and racing with the WorldSBK VideoPass!

Source: WorldSBK.com

PREVIEW: WorldWCR launches inaugural season with first test at Cremona Circuit

The FIM Women’s Circuit Racing World Championship (WorldWCR) represents a significant advancement in motorsports, dedicated to highlighting the talents of female riders on an international platform. As a single-make series, all participants will compete using the Yamaha YZF-R7, focusing on skill and strategy rather than differences in equipment. This inaugural 2024 season will feature 24 riders from a variety of backgrounds, all poised to leave their mark on this historic championship.

THE LOCATION: Cremona to host first WorldWCR action

These 24 WorldWCR riders will convene for the first time on May 16th and 17th at the newly renovated Cremona Circuit in Italy for a test – just one month before the series’ first round at Misano, the Pirelli Emilia-Romagna Round. The Cremona Circuit, set to also host WorldWCR and WorldSBK in September, has recently undergone extensive renovations to enhance the track layout and spectator facilities. The circuit features 13 corners, six to the right and seven to the left with a total length of 3.768km. Featuring long straights – the longest is just under a kilometre in length – and a mix of different types of corners, it makes it a good circuit to test at to get up to speed on new bikes.

WHAT TO WATCH OUT FOR: a first chance to work out the pecking order…

The first test will be met with intrigue up and down the paddock as the 24 riders get their first look at the competition. With every rider coming from different backgrounds and experience, it won’t be a definitive order – especially at a track that’s new to everyone – but it could still give a rough idea. The key part of the test will be seeing who adapts quickly to the R7 and Pirelli tyres ahead of the WorldWCR season starting at Misano. You can find out more about the 24 riders competing in the historic first season right here, with everyone on the entry list scheduled to be present at the test.

HOW WILL THE TEST WORK? Multiple sessions across the two days…

Before hitting the track, the riders will meet with the WorldWCR Technical Staff. All Yamaha YZF-R7s will be set up and maintained by a technical crew managed by JiR’s Luca Montiron, mirroring the structure of the Yamaha R3 bLU cRU FIM World Cup. The riders will participate in their initial briefings and be assigned their own Yamaha YZF-R7, which they will race throughout the six rounds of the 2024 season. After the initial bike setup is complete, they will engage in several practice sessions totalling 1h40 of track time on the first day. On Friday, further practice sessions will provide them with a full two hours to fine-tune their settings. The first track action on Thursday begins at 12:00 Local Time (UTC+2), with six sessions in total, and finishes at 18:20. On Friday, track action begins at 09:00 with seven sessions, concluding at 16:40.

THE BIKE: more detail about the Yamaha R7 machine

In addition to the WorldWCR riders and technical staff, this test will also engage key Championship partners, starting with Yamaha as the provider of the YZF-R7. WorldWCR operates under strict regulations to ensure fair competition, with all riders racing on identical Yamaha YZF-R7 bikes. This bike, the latest in the legendary R-Series, with its high-torque 689cc engine and compact chassis, is ideally suited for the series.

TYRES AVAILABLE: Pirelli’s SC1 compound in use

The riders will use Pirelli DIABLO™ Superbike slick tyres, identical to those used successfully across all categories of the MOTUL FIM Superbike World Championship, where Pirelli has been the continuous Official Supplier since 2004. Specifically, each rider will have access to DIABLO™ Superbike 120/70-17 front and 180/60-17 rear tyres in SC1 compound.

OTHER PARTNERS: Motul and Panta Racing Fuel use their WorldSBK paddock experience

Panta Racing Fuel, part of the Mol Group and based in Italy, will serve as the official fuel supplier. With their extensive experience in the WorldSSP and WorldSSP300 classes, as well as other motorsport competitions such as the Red Bull MotoGP™ Rookies Cup, the CIV (Italian Circuit Racing Championship), the FIM Intercontinental Games, and British Superbike, Panta is the ideal fuel partner for the new championship. Another key partner for this test—and the remainder of the season—is Motul, serving as the official provider of engine oil and lubricants. This partnership ensures that the WorldWCR Yamaha R7s receive the same level of high-performance lubrication as bikes in the premier class.

COVERAGE OF THE TEST: highlights, interviews, reports…

With the first WorldWCR test comes extensive coverage from Cremona. A team on the ground will be there to gather information and speak to the riders, while you’ll also be able to get your first look at the Championship thanks to end-of-day highlights on Thursday and Friday, giving you a roundup of the first test as well as the news from Cremona. On top of that, there will be web coverage featuring reports, news, and reactions to bring you up-to-date with everything from Italy. Of course, there will also be coverage on the WorldSBK’s social media accounts to bring you events as they happen.

Follow all the racing action from WorldWCR in 2024 in style using the WorldSBK VideoPass!

Source: WorldSBK.com

Great American Scenic Byways Tour

Great American Scenic Byways Motorcycle Tour Parkinson's Foundation
Every trip starts with a send-off and the first mile. This banner about supporting the Parkinson’s Foundation made the entire journey with me.

In 2021, Steven Goode completed the Great American Deli Schlep, a 75‑day, 15,000‑mile motorcycle ride during which he visited the best Jewish deli in nearly every state and raised funds for MAZON, a Jewish nonprofit that fights hunger in America. You can read Goode’s feature about that ride here. –Ed. 


I haven’t been everywhere, but it’s on my list.” This is a quote by Susan Sontag and words I ride by.

Great American Scenic Byways Motorcycle Tour Beartooth Highway
Beartooth Pass Summit (see next photo) was the crescendo of a magnificent ride on Beartooth Highway from Wyoming into Red Lodge, Montana. Hairpin curves, few guardrails, and sweeping views make it one of the best scenic byways in America. (Photos by the author)

After completing four major motorcycle trips around our wonderful country, each ranging from 11,000 to 17,000 miles, I told my wife I was done with long‑distance rides. Sort of the same way I’ve told her, many times over, that this was going to be my last motorcycle purchase. Of course, she didn’t believe me. 

Great American Scenic Byways Motorcycle Tour

So when a riding buddy said we should plan a big trip, I was all in. All I needed was a cause and a theme for the ride.

For a cause, I chose the Parkinson’s Foundation. In 2001, my mother passed away from Parkinson’s disease. A motorcycle trip supporting this cause would be a great way to not only honor her memory but raise money to support finding a cure and providing resources for those afflicted with this terrible disease.  

Although my mother most likely would not have approved of my 60‑day, 16,000‑mile motorcycle trip – she was still a mother after all – she would have been extremely proud of my commitment to this cause. She had a wild side, but she didn’t show it often for fear of encouraging her sons to follow in her path, which we did anyway.

Great American Scenic Byways Motorcycle Tour Steven Goode
My late mother was the inspiration for this tour. This photo shows us in our backyard in 1979.

For a theme, we decided to ride the top scenic byways in nearly every state. To help us plan the trip, National Geographic’s Guide to Scenic Highways and Byways (fifth edition) was an invaluable resource that provided descriptions, photos, maps, and interesting facts. 

When I told the Parkinson’s Foundation about my plan, they were immediately supportive and offered to help create public awareness for the trip. An important part of the publicity was social media. I’m in my late 60s, and I didn’t do Facebook, Instagram, TikTok, etc., so their team handled that for me. They also created logos and designed T‑shirts, banners, and a web page for my blog. Klim supported the ride by providing me with a Latitude Gore‑Tex suit, and Nelson‑Rigg provided some waterproof luggage.

Great American Scenic Byways Motorcycle Tour

Scan the QR code or click here to make a donation to the Parkinson’s Foundation.

We named the ride The Great American Scenic Byways Tour supporting Parkinson’s Foundation. After reviewing the route and the time necessary to complete the ride, my friend said the trip would require too much time away from work, so he bowed out. Since I had already committed to the Foundation and this was a personal ride on behalf of my mother, I decided to go alone. 

Great American Scenic Byways Motorcycle Tour Cherohala Skyway
My friend Bruce Benton joined me for a wonderful ride on the Cherohala Skyway in Tennessee and North Carolina.

For those of you who are curious how someone plans a 16,000‑mile trip, here are a few guidelines. First, get a map of the United States and put markers next to the places you plan to travel to. Second, using the rough route map, create a spreadsheet with columns for the city in which you begin your day’s ride; the destination city for that day; miles you plan to ride each day; and notes about the route, landmarks, and things to see. Good planning is key for a successful ride, and being organized reduces stress. 

Great American Scenic Byways Motorcycle Tour Bayshore Scenic Byway
In Delaware I rode the Bayshore Scenic Byway. My Honda Gold Wing was a faithful companion on my deli schlep and scenic byways tours.

A key element to any trip of this magnitude is planning for unforeseen events. My mantra is “It’s all about Plan B.” On a two‑month trip, there will be at least one unexpected twist pop up. Mine came three days in when my dermatologist called to tell me I had a melanoma on my back and he wanted to surgically remove it as soon as possible. Plan B: I turned the bike around, made a beeline to Chicago, had the surgery, and was back on the road 17 days later. 

Great American Scenic Byways Motorcycle Tour Outer Banks Scenic Byway
Cape Hatteras Light Station on the Outer Banks Scenic Byway in North Carolina.

The beauty of this ride’s theme was that each scenic byway has its own personality. Like a thumbprint, every byway is unique. Almost everyone I met during the trip asked me, “What is the best scenic byway?” Just like when asked what the best motorcycle is, I answered, “The one I’m riding.” There are good reasons why National Geographic picked each of these byways to include in its guide. Each one gives the rider a special glimpse into the beauty of the region.

Great American Scenic Byways Motorcycle Tour
This is the Blue Ridge Parkway near Blowing Rock, North Carolina, where the weather seems to change every minute. The quintessential scenic byway is one of America’s treasures.

For example, the Red River Gorge Scenic Byway in Kentucky took me into forested backcountry, and I was able to get lost in my thoughts in the deep woods. One of the interesting features of this scenic byway is the Nada Tunnel, which is 900 feet long but only 12 feet wide and 13 feet high. There’s a single lane through the mountain, with no lights or painted lines. While pondering how to go through it, I asked some local Harley riders for advice. They said, “Look for a headlight at the end of the tunnel. If you see one, don’t go.” I felt like I was in a Road Runner cartoon.

Great American Scenic Byways Motorcycle Tour Nada Tunnel
The Nada Tunnel is located near the Red River Gorge Scenic Byway in Kentucky.

In Newport, Rhode Island, the scenic 10‑mile Ocean Drive provided a glimpse of how the other half lived during the Gilded Age in the late 1800s. The Vanderbilt, Astors, and Morgans all had their summer homes along this rocky coast. 

Great American Scenic Byways Motorcycle Tour Ocean Drive Rhode Island
Mansions along Rhode Island’s Ocean Drive.

Spanning two states, the Talimena National Scenic Byway follows Arkansas Highway 88 and Oklahoma State Highway 1. On the morning I planned to ride it, the forecast said it would be 105 degrees in Dallas, Texas, my next destination. I left at 5 a.m. to arrive in Dallas in time to beat the heat. This early start gave me an opportunity to watch the sunrise over the byway. 

Great American Scenic Byways Motorcycle Tour Talimena National Scenic Byway
Sunrise over the Talimena National Scenic Byway, which goes through Arkansas and Oklahoma.

After five days on the road, I could no longer remember where I was the day before, what I had for dinner the night before, or which hotel I stayed in. That’s one of the great things about a two‑month motorcycle trip – getting lost in the journey. Writing a blog forced me to recreate the trip daily so it didn’t become one huge blur, and it also allowed friends, family, and supporters to follow my progress. 

Great American Scenic Byways Motorcycle Tour
An old steam train in Essex on the Connecticut Valley Scenic Byway.

Another benefit of a trip of this scale is all the things I learned along the way. Like a school on wheels, I learned about our United States up close and personal, gaining a new appreciation for each region’s distinct personality and history. After the trip, I had a better understanding of our collective history. Whether it was exploring what life was like on plantations, following the Trail of Tears, or riding the path of Lewis and Clark, I was able to take a long look at our country and how we grew up as a nation, both the good and the bad. 

Great American Scenic Byways Motorcycle Tour Oak Alley Plantation
Slave quarters at the Oak Alley Plantation in Vacherie, Louisiana. This tour provided an education on America’s past, present, and future.

Every long motorcycle trip has unexpected moments, and one left me speechless and cleaning the mess off my bike for days. Leaving Elko, Nevada, to ride to Idaho, I took State Route 225, a two‑lane road with virtually no traffic. As I was riding north, I noticed something that looked like pinecones on the pavement up ahead. Once I got closer, the “pinecones” began to scurry. As I continued to ride north, they completely covered the road. Then I noticed that the road’s tire tracks were turning red, not asphalt gray. It was an infestation of Mormon crickets, which are about 2 inches long and don’t fly, and I was riding through an invasion of Biblical proportions that went on for 50‑plus miles! 

Great American Scenic Byways Motorcycle Tour Sawtooth Mountains Ponderosa Pines Scenic Byway
Taking a pause to enjoy a view of the Sawtooth Mountains after riding the Ponderosa Pines Scenic Byway in Idaho.

My original plan was to ride through California’s Death Valley National Park. Just before I left, I received a call from my son. “Dad, did you hear that a 65‑year‑old guy just died in Death Valley? He had two flat tires on his car, and nobody came to his rescue. Are you sure you want to go into Death Valley by yourself, on your motorcycle, with temperatures reaching 115 degrees?” Plan B: Due to the intense heat and time constraints after my unexpected surgery, I opted to bypass California, Oregon, and Washington. 

Great American Scenic Byways Motorcycle Tour Wetlands and Wildlife Scenic Byway
The Wetlands and Wildlife Scenic Byway in Kansas.

My favorite scenic byway changed from day to day. When I was on the East Coast, I loved the Rangeley Lakes National Scenic Byway in Maine. Riding the 17.6‑mile Chesapeake Bay Bridge‑Tunnel (U.S. Route 13) in Virginia, which includes a tunnel under the water, from Norfolk to Fisherman Island National Wildlife Refuge, was spectacular.

Great American Scenic Byways Motorcycle Tour Maine
Somewhere in Maine, on my way to Rangeley Lakes Scenic Byway.

Out West, it was U.S. Route 191 (Coronado Trail) in Arizona and State Route 12 in Utah. Beartooth Highway in Wyoming and Montana is a must‑ride. It is hard to choose only one scenic byway because each is special, and every one of them gave me new perspectives on the areas I was traveling through.

Great American Scenic Byways Motorcycle Tour Coronado Trail Scenic Byway
U.S. Route 191 in Arizona between Alpine and Morenci is known as the Coronado Trail Scenic Byway – one of my all-time favorites.

People also asked, “How do you pack for such a big trip?” My only advice is to take less than you think you need but all that’s necessary for unforeseen conditions (rain, cold, heat, etc.). You must think through all the variables and prepare a Plan B. If traveling solo, use a satellite tracking device so family and friends know how to find you. 

Great American Scenic Byways Motorcycle Tour Bryce Canyon National Park
Riding through Bryce Canyon National Park, which is located just off Scenic Byway 12 in Utah.

Long motorcycle trips are not for everyone, but I love not knowing what is on the other side of the hill and feeling the thrill and power of the bike beneath me, experiences that keep me going day after day. I highly recommend checking out National Geographic’s Guide to Scenic Highways and Byways, picking a region, and planning your own adventure. I guarantee you won’t be disappointed. Take the time to enjoy the sights, sensations, and sinuous curves on America’s rich bounty of scenic byways.

Great American Scenic Byways Motorcycle Tour Pike Peak
On the way down from the 14,115-foot summit of Pikes Peak in Colorado.

During his Great American Scenic Byways tour, Steven Goode raised nearly $22,000 for the Parkinson’s Foundation. To make a donation, use the QR code above or click here. To read Goode’s blog, visit this page on Facebook. Below you’ll find a complete list of the scenic byways Goode rode on this tour.

See all of Rider‘s touring stories here.

Great American Scenic Byways Tour

The post Great American Scenic Byways Tour appeared first on Rider Magazine.

Source: RiderMagazine.com

Bringing you the Best Motorcycle News from Around the Web!