Ficeda Accessories have announced the arrival of the Dunlop Sportmax Q4 tyre, offering a purpose built track day tyre capable of lean angles of up to 62 degrees, more than any other street legal tyre Dunlop have made.
Dunlop Sportmax Q4
The Sportmax Q4 features technology used to develop racing tyres in Dunlop’s Buffalo, New York, plant to accommodate track-day-level riding like no other Dunlop DOT street tyre has before.
Features on the Q4 include on-tread branding that’s remarkably detailed, while a new tread pattern with low groove density puts down a massive footprint, especially during maximum lean angles.
Dunlop Sportmax Q4
Street-friendly performance ensures the Q4 does not require tire warmers, and minimises the need for chassis adjustments, while the tyre is designed in new sizes such as 180/60ZR17 and 200/55ZR17 to work on sport bikes with sophisticated electronics packages.
Dunlop Sportmax Q4 footprint graph
The new Q4 also offers a more aggressive profile option for track use for many sport bikes, and the rear tyre features Dunlop’s Jointless Tread (JLT) technology, applying a continuously wound tread strip over the carcass to achieve the ideal stability, flex, and grip across the tyre’s tread profile maintaining consistency.
Dunlop Sportmax Q4
Dunlop’s proprietary Carbon Fiber Technology (CFT) in the sidewalls ensures even greater stability and cornering performance, alongside the brand’s proprietary Intuitive Response Profile (IRP) for ultra-linear and responsive steering.
The Dunlop Sportmax Q4 is available in all good motorcycle stores now, see below for sizing and pricing details.
Florida woman Jennifer St Clair, 33, was killed when she was run over by several cars after she fell off a motorcycle pillion seat on her first date with the rider.
Florida Highway Patrol are not sure of the details of the incident last weekend and are calling for witnesses.
The rider has been identified and the matter is being treated as a traffic homicide.
Witnesses say the rider sped off and left the woman for dead on the highway.
This is terribly sad news and we can only speculate on what might have happened.
The general rule is that the more comfortable the passenger is, the safer you both are.
But that doesn’t mean you can only carry a pillion if you own a Gold Wing or Ultra Classic.
Perhaps the most enjoyable pillioning my wife and I have ever done was on a Triumph Bonneville T100.
Mr and Mrs MBW
She prefers light bikes because she feels I’ll be able to hold it up. She also prefers they aren’t too powerful and intimidating. The Bonne is also low enough for to just throw a leg over, rather than having to step on the footpeg and hoist over.
But there is no use buying a bike your regular passenger will hate, so ask their opinion. They may actually prefer the budgie perch of a sportsbike because it satisfies their desire for sportiness over comfort.
That means lots and lots of test rides together.
2 Mounting and dismounting.
Advise your pillion to ask permission before hopping on so you have a good hold of the bars and both feet on the ground. Don’t try to do this on the side stand as you may bend it, nor the centre stand as you may not be able to rock the bike to get it back down.
Request your passenger to alight as soon as you stop, then park your bike without them. Don’t be a hero and try to do it with them on board unless you are certain of your abilities and the ground surface. If you drop it, you will quickly go from hero to zero.
Mrs MotorbikeWriter in her pillion position aboard an Indian Roadmaster
3 Exhaust warning.
Warn your pillion about putting their foot or leg on the hot exhaust. Nothing spoils a two-up trip more than a quick visit to the emergency ward to treat a leg burn.
4 Don’t scare your pillion.
They won’t have any trust in you if the first time you take them for a ride you hoist it up on one wheel or whittle down your knee sliders in the corners.
As their level of trust rises, you may add these to your repertoire, but always give them a tap on the leg first to broadcast that you are about to do a wheelie (easier with a pillion) or go for a radical lean angle.
5 Communicate.
Rider and pillion communication used to consist of hand signals or, more likely, a vice-like thigh grip from your pillion when they are scared or a whack on the back of the helmet when they want you to stop and let them off.
Agree on a set of signals before you even put on your helmets and mount the bike. You’ll need signals for when you can mount, hazard coming up (bump, sharp turn etc), slow down, speed up, stop, and when to get off.
If it all sounds too complicated, get a Bluetooth communications system. It not only clears up any confusing hand signals, but also means you can enjoy a chat with your pillion.
6 Be smooth.
Anyone who has ever carried a pillion will be aware of “helmet bump”.
As you accelerate, your pillion tenses their stomach muscles and pulls themselves forward. Your pillion doesn’t know when you are going to change gears, so they stay tense. As soon you dip the clutch, momentum slightly lags and they naturally rock forward, banging their helmet into yours.
There are two ways you can prevent this.
First is to be smooth with your gear changes. The second is to move your head and shoulders forward as you pull the clutch in, leaving the lower part of your back as a buffer to soak up your pillion’s forward movement.
After a while, most pillions learn to listen to the engine revs and brace themselves for the coming gear change.
The “pillion in a million”
7 To lean or not to lean.
Of course, pillions shouldn’t lean opposite to the rider.
But some riders tell their pillion to lean into the corner with them.
I don’t agree as you never know how much they will lean and therefore how tightly the bike will corner.
It’s best to tell them to remain fairly still throughout your journey. In fact, advise your pillion that any fidgeting can cause instability and a possible topple, especially at slow speeds and when stopped at the traffic lights.
8 Suspension adjustment.
Most bikes have their suspension set at the factory for the “standard rider” weight of about 80kg. If you weigh substantially more or less, you should make suitable adjustments to the suspension.
However, a pillion changes the load even more significantly. A rider might vary several kilograms above or below the standard rider weight, but a pillion can more than double that difference.
Also, the centre of gravity is now much higher and further back, which will upset the handling and make the steering light.
If your bike has suspension adjustment, make sure you use it. Usually pumping up the preload on the rear spring is enough.
If there is no adjustment and you are going to be doing a lot of two-up riding, it is wise to fit an adjustable rear shock.
Other areas that may need adjustment include the tyres, chain and headlights. Consult your manual for ideal tyre pressures for two-up and how to adjust the chain and headlight beam.
You can reduce handling and steering anomalies by asking your pillion to sit as close as possible to you. Then you will move together in harmony with the bike and better focus the bike’s centre of gravity. But be aware this will prevent you moving around in your seat and you will have to adjust your riding style to suit.
9 Braking.
A pillion’s weight will also reduce braking efficiency.
Not only will the bike take longer to stop, but in a panic situation, your pillion may be flung on to your back. You not only have to support all your weight on your wrists, but also the weight of your pillion. This can cause riders to lose grip on the bars with inevitable consequences.
Also, the rearward weight bias will make the rear brake more effective and less likely to lock up, so use it more. But that does not mean you should use the front brake any less.
10 Gear up.
Just as riders should always wear the right gear, so should pillions.
Your pillion deserves the same level of equipment protection as you.
That also means warm gear when it’s cold, hot weather gear for summer and wets for when it rains.
Riders should also be aware that they block much of the breeze from their pillion, so in summer your pillion is going to need even better ventilated gear.
In winter, riders get some comfort from the heat that comes off the engine, but their pillion may not, so it’s advisable they rug up even more than you.
Bike accessories are also important to a pillion. Luggage will allow them to bring an extra pair of high heels and cocktail dress with them and a sissy bar will provide extra confidence.
However, a loud aftermarket pipe might just be too annoying. Remember, they are a lot closer to it than you. At least put the baffle plug in when carrying a pillion.
Do you have any other pillion safety tips? Leave your comments below.
The Hayabusa may be dead in Europe, but it’s still coming to the US for 2019.
Begin press release:
Suzuki Motor of America, Inc. (SMAI) has confirmed that U.S. market production of the Hayabusa sport motorcycle continues uninterrupted. Production of European specification Hayabusa models has been discontinued due to Euro 4 emission regulations. This situation, and resulting media reports, may have caused confusion and misunderstand among U.S. consumers, media, and dealers.
Commenting on the status of the iconic sports motorcycle, Kerry Graeber, Suzuki’s Vice President, MC/ATV Sales and Marketing, said the following, “From its inception 20 years ago, the iconic Hayabusa motorcycle has been a visually- and technologically-stunning representation of Suzuki’s commitment to motorcycle performance. Literally tens of thousands of riders have owned this beloved model and it continues to be sought after even today. GT riders, drag racers, and customizers worldwide are obsessively devoted to the Hayabusa and we are looking forward to continuing its legacy. Suzuki Motor Corporation’s commitment to this model means a new generation of motorcyclists can experience the unmatched performance and style that the Hayabusa is known for globally.”
The lion’s share of the Street Scrambler’s power bump is in the mid-to-high-end, making highway passes easier and reducing the need to downshift in corners. Photos by Kingdom Creative.
Triumph’s 2017 Street Scrambler, powered by the 900cc “High-Torque” parallel twin used in the Street Twin, rolled into the gap left by the departure of the previous generation Scrambler two years ago. With less weight, more power and a slightly modernized look, it has proven to be a popular choice in Triumph’s modern classic line, and for 2019 it has received a refresh that includes a bump in mid-range power, a new cartridge-style fork and a Brembo front brake.
As its name suggests, the Street Scrambler is primarily a road-going machine (those looking for more than just light off-roading adventures should give the all-new Scrambler 1200 a hard look), and after riding it and its Street Twin sibling (which received similar changes this year) back-to-back at the press launch in Portugal, the Street Scrambler’s upright, commanding riding position proved to be well-suited to navigating the urban jungle.
With its wide handlebar and footpegs mounted below and a bit forward of the 31.1-inch seat to aid in standing, I found the Street Scrambler fit my 5-foot, 9-inch frame well. Although its new 41mm KYB cartridge fork has the same 120mm (4.7 inches) of travel as before, it has a wider stance and feels just a tad beefier, though not intrusively so. Rear suspension, with 4.7 inches of travel and adjustable for preload only, is unchanged.
At 135 pounds, I weigh less than the “average” rider for whom most bikes this size are sprung, but I could still detect an improvement in rebound damping up front that made for a slightly more plush ride. The rear is still rather harsh, so if it were mine, I’d invest in lighter springs up front and a set of Triumph’s accessory Fox shocks for the back.
A 4-piston fixed Brembo caliper improves upon the old 2-piston Nissin, offering better performance as well as lever feel and feedback.
Performance from the single 310mm-disc front brake has been improved, with an opposed 4-piston Brembo caliper replacing the old 2-piston Nissin unit; a floating 2-piston Nissin still squeezes the 255mm rear disc. The difference is noticeable, with more bite up front and better lever feel, increasing confidence when riding aggressively or in the rain.
The big news, though, is the increase in power, a claimed 18 percent more peak horsepower to be exact, plus a flatter torque curve that delivers in the “real-world” range of 3,500 to 5,500 rpm, achieved via a minor retune and a few lighter bits in the engine–a magnesium cam cover, a lighter crankshaft, dead shafts and the balance shafts that ride on them, a mass-optimized clutch cover and a lighter clutch.
Our first ride aboard the new Street Scrambler took place in beautiful Portugal…where it promptly rained, allowing us a chance to test the new Rain ride mode. Fortunately, the sun came out and we enjoyed this beautiful sunset.
Based on the Jett Tuning dyno results in our Rider Test of the identically-powered 2016 Street Twin, the increase should translate to 62 peak horsepower arriving close to the higher 7,500-rpm redline, with peak torque unchanged at 56.7 lb-ft at 3,200 rpm. The seat-of-the-pants result is a new sense of urgency and more get up and go in the mid- to high-end; on our first ride in the mountains near Lisbon, Portugal, I felt it most noticeably during 40-mph roll-ons and when accelerating out of corners, reducing the need to downshift.
The dual-counterbalanced engine has a bit of a V-twin character infusion thanks to a 270-degree firing interval, with a feather-light assist clutch (with adjustable lever, thank you Triumph!) operating the five-speed gearbox. Despite its dirty overtures, the Street Scrambler is geared fairly tall, and I didn’t find myself missing a sixth gear even cruising at 70 mph on the freeway; I’m guessing most Scrambler buyers aren’t looking to cruise at triple digits anyway. The soundtrack is classic Triumph, surprisingly throaty and with a pleasant amount of burble on deceleration.
It looks the same from the outside, but lighter components in the engine as well as a retune boost peak horsepower by a claimed 18 percent.
Harnessing all this is a smooth throttle-by-wire system with standard 2-channel ABS and switchable traction control, but new this year is the addition of Road, Rain and Off-Road ride modes. Road is the default setting; while Rain softens throttle response and increases traction control intervention, power output is unchanged. Off-Road leaves the throttle map in snappy Road mode and turns ABS and traction control completely off. Rain and Road modes are easily selectable on the fly using a large button on the left switchgear; the bike must be stationary to select Off-Road mode.
Our riding day in Portugal was blessedly sunny, but it had rained for several days prior so we were warned to use caution (and Rain mode) on the shady, twisty mountain roads. It was a double-duty press launch, with Triumph giving us first rides on both the Street Twin and Street Scrambler. We were assigned one model for the morning and one for the afternoon, swapping at lunch as well as the four photo stops, giving us the unique experience of getting to ride these similar yet oh-so-different bikes back-to-back. It quickly became apparent that they are indeed two distinct motorcycles that will likely appeal to different riders, and not just because of their aesthetics.
New instrument features more indicator lights. ABS can be switched off using the Off-Road ride mode.
I started the day on a Street Scrambler, and as I already noted it felt immediately comfortable. Though suspension travel is identical to the Street Twin, the Street Scrambler is fitted with longer springs front and rear that, along with the 19-inch front wheel, contribute to its feel as a larger machine. It’s not my imagination–though it has shed a few pounds since last year the Scrambler is still about 10 pounds heavier than the Twin, and a glance at the spec sheet shows it’s also longer, taller and wider at the bars.
In the morning, when the roads were still quite damp, I kept my Scrambler in Rain mode; because it maintains full engine power, I found the slightly softer throttle response to be easier to modulate as we negotiated the unfamiliar–and often quite bumpy–twists and turns, without feeling too heavily reined-in. As the roads dried out and I swapped back and forth on each bike in Road mode, I found myself appreciating their unique experiences.
Despite its heft (compared to the diminutive Street Twin), I felt quicker and more comfortable on the Street Scrambler.
The Street Twin felt smaller, lighter and surprisingly sporty. Its tubeless Pirelli Phantom Sportscomp tires (rolling on cast aluminum wheels, 18 inches up front and 17 at the rear) were working better on the dry pavement than they had in the morning, and despite the narrow bar I was able to flick the Twin through corners easily.
Yet despite its expanded dimensions and heavy spoked steel wheels (with that larger 19 up front), I felt quicker on the Street Scrambler. Maybe it was the added leverage from the wider bar, and the Metzeler Tourance ADV-style tires were performing very well regardless of road conditions…but it could just be that I was more comfortable. A quick poll of my fellow journalists seemed to support that theory; smaller folks liked the Twin, taller ones the Scrambler.
Giddyup! I like the LED cat’s eye taillight and high-piped attitude of the Street Scrambler.
I really liked the first generation, but as a fun, stylish, accessible scrambler-style ride this new Street Scrambler is even better than before–better enough, in fact, to seriously tempt me into making one my own.
2019 Triumph Street Scrambler in Fusion White.
2019 Triumph Street Scrambler
Base Price: $11,000 (Fusion White) Website:triumphmotorcycles.com Engine Type: Liquid-cooled, transverse parallel twin, SOHC, 4 valves per cyl. Displacement: 900cc Bore x Stroke: 84.6 x 80.0mm Transmission: 5-speed, torque assist wet multi-plate clutch Final Drive: O-ring chain Wheelbase: 56.9 in. Rake/Trail: 25.6 degrees/4.3 in. Seat Height: 31.1 in. Claimed Dry Weight: 448 lbs. Fuel Capacity: 3.2 gals. MPG: NA
For 2019, the Street Twin gets more power, better suspension, ride modes and a light style refresh. Photos by Kingdom Creative.
Triumph’s Bonnie business is booming, but the top seller isn’t the sporty Thruxton, the distinguished T120 or the stripped-bare Bobber. Nope, the best-selling Bonneville of them all is the affordable, accessible, ripe-for-customization Street Twin. The Street Twin is everything you need and nothing you don’t: it looks like a motorcycle should without trying too hard, with enough modern performance and technology to remain relevant and fun.
It’s the rare bike that transcends age and gender; according to Triumph, Street Twin buyers represent the widest age range of any of its Bonneville models and many are new riders, plus more than twice the “normal” number are women–no doubt attracted to the Twin’s sub-30-inch seat height.
Cruising the Portuguese coast on the new Street Twin, I was grateful for the accessory heated grips that Triumph had fitted to our test bikes.
The year after its 2016 launch, the Street Twin spawned two derivatives powered by the same liquid-cooled 900cc SOHC parallel twin, the Street Cup café racer and the Street Scrambler, each with its own purpose-built chassis and distinct personality. For 2019, the original Street Twin as well as its Street Scrambler sibling are getting some notable updates, including a bump in power, revised front suspension and brakes, new ride modes and a light style refresh. Street Twin version 2.0, here we go!
First let’s talk power, a claimed 18 percent more peak horsepower to be exact, plus a flatter torque curve that delivers in the “real-world” range of 3,500 to 5,500 rpm, achieved via a minor retune and a few lighter bits in the engine–a magnesium cam cover, a lighter crankshaft, dead shafts and the balance shafts that ride on them, a mass-optimized clutch cover and a lighter clutch. Based on the Jett Tuning dyno results in our Rider Test of the 2016 Street Twin, the increase should translate to 62 peak horsepower arriving close to the higher 7,500-rpm redline, with peak torque unchanged at 56.7 lb-ft at 3,200 rpm. The seat-of-the-pants result is a new sense of urgency and more get up and go in the mid- to high-end; on our first ride in the mountains near Lisbon, Portugal, I felt it most noticeably during 40-mph roll-ons and when accelerating out of corners, reducing the need to downshift.
It looks the same from the outside, but lighter components in the engine as well as a retune boost peak horsepower by a claimed 18 percent.
The dual-counterbalanced engine has a bit of a V-twin character infusion thanks to a 270-degree firing interval, with a feather-light assist clutch (with adjustable lever, thank you Triumph!) operating the five-speed gearbox. The Street Twin is geared fairly tall, and I didn’t find myself missing a sixth gear even cruising at 70 mph on the freeway; I’m guessing most Twin buyers aren’t looking to do much more than tickle the “ton” anyway. The soundtrack is classic Triumph, surprisingly throaty and with a pleasant amount of burble on deceleration.
Harnessing all this is a smooth throttle-by-wire system with standard 2-channel ABS and switchable traction control, but new this year is the addition of Road and Rain ride modes, easily switchable on the fly via a large button on the left switchgear. Road is the default setting; while Rain softens throttle response and increases traction control intervention, power output is unchanged.
A slightly dished bench seat and narrow handlebar create compact, comfortable ergos that are attractive to smaller riders.
Performance from the single 310mm-disc front brake has been improved, with an opposed 4-piston Brembo caliper replacing the old 2-piston Nissin unit; a floating 2-piston Nissin still squeezes the 255mm rear disc. The difference is noticeable, with more bite up front and better lever feel, increasing confidence when riding aggressively or in the rain.
The Street Twin also boasts a new 41mm non-adjustable KYB cartridge fork, and although it has the same 120mm (4.7 inches) of travel as before, it has a wider stance and feels just a tad beefier. Rear suspension, with 4.7 inches of travel and adjustable for preload only, is unchanged. At 135 pounds, I weight less than the “average” rider for whom most bikes this size are sprung, but I could still detect an improvement in rebound damping up front that made for a slightly more plush ride. The rear is still rather harsh, so if it were mine, I’d invest in lighter springs up front and a set of Triumph’s accessory Fox shocks for the back.
New cast aluminum wheels with contrasting silver details are part of the style refresh for 2019.
Our riding day in Portugal was blessedly sunny, but it had rained for several days prior so we were warned to use caution (and Rain mode) on the shady, twisty mountain roads. In a unique twist, Triumph was letting us ride both the Twin and the Scrambler; we were assigned one model for the morning and one for the afternoon, swapping at lunch as well as the four photo stops, giving us the unique experience of getting to ride these similar yet oh-so-different bikes back-to-back. It quickly became apparent that they are indeed two distinct motorcycles that will likely appeal to different riders, and not just because of their aesthetics.
I started the day on a Street Scrambler, and with its wide handlebar and footpegs mounted below and a bit forward of the 31.1-inch seat, it fit my 5-foot, 9-inch frame well. Settling onto its lower 29.9-inch seat the Street Twin, by contrast, felt much more compact–almost too much so for my 34-inch inseam. As it turns out, Triumph actually added 10mm (0.4-inch) of seat foam to improve rider and passenger comfort, increasing the seat height correspondingly and placing the rider in a slightly sportier position over the handlebar. On the brief photo shoot passes and even during the longer stints on the afternoon ride, the compact riding position never bothered me–in fact I was grinning madly inside my helmet as we chased the curves down to the crashing waves of the Portuguese coast–but if I were to choose one I’d say the Scrambler fit me better.
New instrument features more indicator lights, plus info like fuel level, gear indicator, ride mode, tripmeter/odometer and traction control information.
In the morning, when the roads were still quite damp, I kept my Scrambler in Rain mode; because it maintains full engine power, I found the slightly softer throttle response to be easier to modulate as we negotiated the unfamiliar–and often quite bumpy–twists and turns, without feeling too heavily reined-in. As the roads dried out and I swapped back and forth on each bike in Road mode, I found myself appreciating their unique experiences. The Street Twin felt smaller, lighter and surprisingly sporty. Its tubeless Pirelli Phantom Sportscomp tires (rolling on cast aluminum wheels, 18 inches up front and 17 at the rear) were working better on the dry pavement than they had in the morning, and despite the narrow bar I was able to flick the Twin through corners easily.
Comfortable, accessible, affordable, fun and good looking: the Street Twin likely has a bright future ahead of it.
At the end of the day, the Street Twin is designed to be fun, stylish and accessible to a wide range of riders. With thoughtful touches like the easy-pull torque-assist clutch, low seat height, adjustable brake and clutch levers, enough tech to have your back without requiring a small supercomputer, 10,000-mile service intervals (20,000 miles for valve inspections) and a reasonable price tag, the Street Twin is easy to ride, easy to own and easy on the eyes.
2019 Triumph Street Twin in Matt Ironstone.
2019 Triumph Street Twin
Base Price: $9,300 (Jet Black) Price as Tested: $9,550 (Matt Ironstone) Website:triumphmotorcycles.com Engine Type: Liquid-cooled, transverse parallel twin, SOHC, 4 valves per cyl. Displacement: 900cc Bore x Stroke: 84.6 x 80.0mm Transmission: 5-speed, torque assist wet multi-plate clutch Final Drive: O-ring chain Wheelbase: 55.7 in. Rake/Trail: 25.1 degrees/4.0 in. Seat Height: 29.9 in. Claimed Dry Weight: 437 lbs. Fuel Capacity: 3.2 gals. MPG: NA
Franco Morbidelli is feeling satisfied and optimistic about his first experience with the PETRONAS Yamaha SRT
The Italian rider Franco Morbidelli, riding for Petronas Yamaha Sepang Racing Team –the first Malaysian team in the MotoGP World Championship– was one of the standout riders in the first 2019 preseason tests, which took place last month at Valencia and Jerez. Now enjoying a hard-earned winter break, Morbidelli discusses his role in this new project and in particular how the first few days have gone with his new team and his first laps on the Yamaha YZR-M1.
2018: Franco Morbidelli’s best year yet 03/12/2018
From Moto2™ World Champion in 2017, Rookie of the Year in 2018, to joining the new Petronas Yamaha SRT. What’s next for Franco Morbidelli?
What did you think when you were first offered the opportunity to join this new project?
“I felt very happy when I received the call from my manager and he told me about this possibility. He told me about a new, ambitious project with good opportunities that could be a great challenge for me. From that moment I was interested in the structure of the new team and I spoke with the people at Yamaha”.
Do you feel like an important part of this new PETRONAS Yamaha SRT adventure?
“I feel like I am one of the people that has to make this a great project. I don’t feel like I have more or less responsibility than anybody else, we are all equally important. Each person has to do their job to the best of their ability to make PETRONAS, Yamaha, the partners and the fans proud of us”.
After your rookie season in MotoGP, do you feel more pressure for the season ahead?
“There is always pressure in this game, so yes I feel it but it’s not a problem – it is how this sport works”.
You recently spent two weeks testing with the team. How did you find the first few days together with them?
“Really good. I felt comfortable from the first day mainly because I have worked with the majority of staff already in other teams, so there were no big surprises for me. Also, the ones I haven’t worked with before I knew, and we have been speaking for a while”.
One of the team members that you haven’t worked with before is your crew chief Ramon Forcada. What is it like to work with such an experienced professional as him?
“It is going really well. So far we have only done four days of testing but the feeling is very positive. He is very experienced as a man and as a crew chief, so I am very curious to see how we can translate our work onto the track”.
What were your first impressions of the Yamaha YZR-M1?
“It is a very easy bike to take to the limit and this surprised me a lot. When you reach that extreme point it is the moment to work on how you push it further. That is when the real work starts”.
“I am excited to meet the fans in Malaysia because I know that the love they have for MotoGP is huge and I want to experience it first-hand alongside the team”
Do you think you will have to change your riding style to adapt to this new bike?
“We still need more laps to understand perfectly how and what I need to change about my riding style. I think it will be a natural process, which we will take step by step, to see what I need to go faster”.
We could see at the test that you have good support from Yamaha Motor Co. This must be something very important for the team.
“Both at Valencia and Jerez, we had a lot of Yamaha staff on hand, working and helping us out in the garage. That’s a good thing because it means we can give them our feedback and all the information we have so that they can work in the right direction for next season”.
What are your expectations for the 2019 season?
“I think it is still too early to set our objectives, we have to wait and see how the next tests go in February and March. We are expecting new material for the next tests so we’ll have to try them out and see how we get on. Once preseason is over we will have a good idea where we can expect to be in the Grands Prix”.
Now you have two months until you next ride the bike. What is your plan for the time off?
“The idea is to rest, a lot and to spend time with my family and my people. I am also looking forward to going skiing for a few days with my friends”.
In a couple of months it will be time to head to Malaysia for the first time, which will be a very important moment for the whole team.
“The team presentation is planned for Malaysia, just before the test at the Sepang International Circuit, so I am really looking forward to seeing what kind of reception we get. I am excited to meet the fans in this country because I know that the love they have for MotoGP is huge and I want to experience it first-hand alongside the team”.
Keep calm and carry this stuff to keep you and your bike moving
An off doesn’t have to mean the end of your ride. After a few unscheduled ballistic re-entries of our own, we’ve gathered up the perfect kit to keep going…
Overall in 2018 there were less crashes, in part thanks to the better weather that greeted much of the season. The grand total over all categories is 1077, versus 1126 in 2017. 303 were in MotoGP™, down 10 on last season, Moto2™ had 418 rather than 434, and there were 356 in the lightweight class – 23 less.
Remy Gardner looks forward to season 2019 after successful test at Jerez with SAG Racing Team
Luca Marini (Sky Racing Team VR46) was quickest overall at the recent Moto2 three-day test at Jerez, followed by Sam Lowes (Federal Oil Gresini Moto2) and Alex Marquez (EG 0,0 Marc VDS).
Next best though was young Australian Remy Gardner, in what was a great boost for the son of 1987 World Champion, Wayne, and will fill him with confidence as he looks towards season 2019 with a new squad, and a new machine.
20-year-old Gardner had a difficult season with Tech3, the French squad used their own chassis throughout this year’s championship and while Remy finished the season on a high with fifth place at Valencia, it was not a season without difficulty, and injury.
Gardner has obviously enjoyed the switch to the more dominant Kalex frame, and his move into the SAG Racing Team that he will contest the Moto2 Championship with in 2019, alongside Japanese team-mate, 26-year-old Tetsuta Nagashima.
Remy Gardner
“To finish off the season in P5 in Valencia was a real high for me, it was nice to give the Tech3 Team one last result before I left.
Remy Gardner took an impressive fifth place at the Valencia season finale with Tech3
“I was going to Jerez with very high hopes after the last few races. The new team are great, and I couldn’t be happier. I got on really really well with my crew chief, and I’m impressed with his work so far.
Remy Gardner
“The new Triumph engine is absolutely awesome, so much torque and a lot faster. A different riding style was needed compared to the CBR600 engine. More stop and go, a little MotoGP style even.
Remy Gardner
“The Kalex works an absolute dream. Right from the first laps I felt so comfortable, the front end is amazing and the grip is on a another planet. I’m only left thinking what would have been if I had this opportunity before.
Remy Gardner
“We still need to work on our settings as I’m still not feeling 100 per cent with the bike yet, but we’re not far off.
“KTM at the moment seem to have big troubles with their frame, many riders told me they have unbelievable chatter problems so it seems I made the right choice with Kalex!
Remy Gardner
“Anyway now I have a preseason to prepare and focus on next year. Can’t wait for what’s to come!”
Remy Gardner with SAG Team boss Eduardo Perales
Now of course Moto2, like the other classes of MotoGP, are in European winter recess, with the new era of Triumph Moto2 power next firing up for an Official Test on the 20th-22nd February at Jerez.
Remy Gardner
Moto2 Jerez Test 2019 – Jerez Three-Day Combined Times
2018 was an important year for Thailand and MotoGP. On the paddock’s first visit to Chang International Circuit for testing, fans flocked to the track to get their first glimpse of the sport and ahead of the first ever Grand Prix in the country, the pre-event in Bangkok showed the fervor for MotoGP as more than 100 representatives of the media packed in to hear the thoughts of reigning Champion Marc Marquez.
Thailand MotoGP 2018 – Image by AJRN
There was a lot of expectation but the Thai GP was an incredible success and has now been named the best of the season by the MotoGP Paddock and the decision communicated to the Grand Prix Commission.
Thailand MotoGP 2018 – Image by AJRN
Newin Chidchob President of Chang International Circuit
“On behalf of both the people of Buriram and Thailand, we are extremely honored to receive the MotoGP Grand Prix of the year 2018. We are sincerely grateful for the recognition we have received for PTT Thailand Grand Prix. Of course, during the preparation of the event we ran into countless obstacles, but in overcoming them we grew, and ultimately resulted in the success of the event. A big thank you to all our event and circuit sponsors especially the Ministry of Tourism and Sports and PTT Public Company Limited for the immense support during this event. We must also thank the people of Buriram, for showing the capability of Thai people to the world. Many of the unique functions of the event such as the “E-Tan” truck which we utilized as the event’s shuttle bus. The Muay Thai (Thai boxing) expo to showcase Thai martial arts and culture. Not to mention all the volunteers who came to simply pick up the trash and keep the event clean. Everyone really came together to make this sports entertainment experience for our visitors from around the world unforgettable. Lastly, we would like to take this opportunity to say thank you to our good friends Dorna Sports who saw potential in us and gave us the opportunity to be a part of the world’s greatest motorcycle series. We promise to always use the experience gained in every event to create a better PTT Thailand Grand Prix every season. Thank you!”
Thailand MotoGP 2018 – Image by AJRN
The event at Buriram was also the best attended with over 220,000 people heading to Chang International Circuit over the three days. They were treated to a modern classic as Marquez fought it out with Andrea Dovizioso down to the final corner, coming out on top for the first time in one of the pair’s many head-to-head duels in the last few seasons.
Thailand MotoGP 2018 – Image by AJRN
Herve Poncharal, President of IRTA
“The whole MotoGP paddock was keen to discover how the new Thai GP would be, we were impatient for it to arrive and there was plenty of expectation. In the end we can be assured it was the best GP of the season due to many different aspects – we expected good, but we didn’t know quite what they would be able to achieve. Everything went smoothly, the commitment of the organisers was fantastic and they faced any problems through the weekend quickly, trying to find solutions as soon as possible. The crowd, the people…every single person involved was happy and always smiling. The fans’ support was incredible, the access to the circuit was fast and they demonstrated that they understood MotoGP – creating a commercial area close to the paddock, giving good exposure to our businesses, investors, sponsors, teams and riders. It’s also significant that a new event in this area – an important region for MotoGP – has achieved this result. It’s a perfect example for other countries to follow and this prize is fully deserved. From my point of view it will be hard for them to improve!”
Thailand MotoGP 2018 – Image by AJRN
It was an exciting and fitting debut, with the Thai venue and crowds providing the perfect backdrop. Rewarded for the incredible organisation, facilities and atmosphere at the event, the Thai GP will now look ahead to 2019 in a bid to retain the prestigious prize.
Thailand MotoGP 2018 – Image by AJRN
Carmelo Ezpeleta, CEO of Dorna Sports
“I was delighted to welcome Buriram onto the MotoGP calendar and I’m delighted to see the Thai GP be recognised as the best this season. Asia is an important market for the Championship and events like Buriram only further underline the incredible popularity of our sport in the region. They are a perfect blueprint for future events and we’re excited to return to Buriram already.”
Thailand MotoGP 2018 – Image by AJRN
MotoGP 2018 – Thailand Race Results
Chang International Circuit, 26 laps, 118.4 km (1 lap: 4.554 km)
Bringing you the Best Motorcycle News from Around the Web!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
