MV Agusta has received some big money for its big plans. Stay tuned for news from EICMA regarding MV’s future plans.
Begin Press Release:
MV AGUSTA HAS COMPLETED AN IMPORTANT CAPITAL INJECTION TO SUPPORT ITS GROWTH
Varese, 2nd November 2018 – MV Agusta, the iconic motorcycle company, leader in the production of premium motorcycles, has completed a capital injection of approximately Euro 40 ml in order to strengthen the company resources to enhance its industrial and commercial plan.
This additional capital has been completely injected by MV Agusta shareholders bringing their total injection in the company in excess of Euro 50 ml over the last 12 months.
The industrial plan of the historical Italian brand is based on several key pillars: focusing on premium high-quality products, developing the sales network, and increasing the level of service as well as producing the most beautiful, technologically advanced motorcycles in the world.
With regards to the sales network, MV Agusta is adopting a strategy focused at reducing the current number of dealers allowing its best dealers to increase their territories as well as promoting new mono-brand stores. MV Agusta Moscow is opening within the current month and MV Agusta London by mid-2019 together with other 6 new mono-brand stores within the next 12 months.
Another key point of MV Agusta plan is the reinforcement of the service level to both the existing network and clients through the introduction of a new integrated system linking MV Agusta, its network and supply chain in order to reduce the lead time of spare parts and accessories as well as the new product delivery to the market.
Additionally, after completing their core 3 cylinders product line that now ranges from 675 cc motorcycles to 800 cc high-performance motorcycles, MV Agusta is launching a new range of premium 4 cylinders of 1000 cc displacement.
In the coming days, MV Agusta will unveil the all-new Brutale 1000 hyper-naked with a record top speed of 312 km/h and an astonishing 212 hp. The fastest and most powerful naked bike ever produced.
Along with the all-new Brutale 1000, MV Agusta will unveil the F4 Claudio, a masterpiece, produced in only 100 units and dedicated to Claudio Castiglioni, the soul of MV Agusta and inventor of the F4 Superbike.
The MV Agusta Board of Directors appointed Giovanni Castiglioni as President and Timur Sardarov as the new Chief Executive Officer and Chairman of Board of the Group.
Despite the threat of rain throughout the day, the MotoGP riders were able to get two full dry sessions done and dusted in Malaysia, and it was the Suzuki leading the way as the chequered flag came out at the end of FP2.
Rins was the man at the summit thanks to his late FP2 time, with Dovi failing to improve on his FP1 time in the afternoon session – P7 for the Italian in FP2.
Alex Rins – P1
“I’m really happy because the bike was really good today. Our rhythm was strong, even with a used tyre, so we’re feeling hopeful. The bike has actually changed quite a lot since we tested here; it has better top speed and we have a different configuration of aero fairing, so we can clearly see the positive development which has taken place during the season. I’m looking forward to tomorrow.”
Alex Rins
Marquez, meanwhile, finished the second session in P2, but the World Champion had an eventful day. In typical Marquez fashion, the number 93 had to save the front of his RC213V numerous times across the two sessions.
Marc Marquez – P3
“All in all it was a good day for us. This morning I felt good, but this afternoon we struggled a lot at the beginning of the FP2 session: I had some moments and had save it a few times. Finally, we changed the front tyre from hard to medium and in the last run we could improve our speed and our lap time. Anyway we need to work very hard on our race pace. We’ll try a different setup in order to see if we may manage better the front tyre. We need to make a step forward is we want to get closer to Dovizioso, who at the moment is the fastest out there.”
Marc Marquez
There were no such close shaves for fourth place overall and sixth fastest in FP2 Valentino Rossi though, as ‘The Doctor’ had a strong Friday to end the day so close to the top.
Valentino Rossi – P4
“The first day is positive for us, because I was quite fast this morning and also this afternoon. After checking the data on Phillip Island, we worked a lot on the setting of the bike. We tried to improve the grip level, especially from the rear tyre. The first impression is positive, because I was good on a hot lap and also the pace is not so bad. It’s only Friday, so we still have to see, but the start was good. Now we have to concentrate especially on the tyre choice, because it’s still very open, front and rear. We also have to wait and see what the weather will be like. We hope it will remain dry, especially for Sunday.”
Just behind him and fifth on the combined times was Jack Miller on board his Alma Pramac Racing Ducati, the Australian setting a quickest time of 1:59.771 to end FP2 in P3, and Miller was also the first rider to dip into the 1:59s in FP2.
Jack Miller – P5
“I had a lot of fun today and I’m satisfied with what we did in both FP1 FP2. I am very confident because we are fast on both race pace and lap time. Tomorrow we will also have to work on the tyres to find out which is the best choice for the race”.
Jack Miller
Meanwhile, Australian GP winner Maverick Viñales (Movistar Yamaha MotoGP) completes the day P6 on the overall times, the Spaniard going fourth fastest in FP2 to end the day less than two tenths off P1.
Maverick Viñales – P6
“It’s been a positive day, because I honestly didn’t expect to be so competitive here. Last year I struggled a lot, this is one of the tracks I struggled at the most, but suddenly, when I went out today, I felt really good. In FP1 I had a good rhythm and we have to keep working in that way. I need to concentrate a little bit more on the lines, but there’s not much to work on. We have to put in a good lap for qualifying and then make sure we’re ready for the race. I hope it will stay dry, because I had such a good feeling, but in Japan when I jumped on the bike with wet tyres, I felt strong too. We have to keep focusing on the set-up we have right now, and let’s see what happens. If the race is wet, I hope we will have had the chance to work on the wet set-up before then. The level this year is much higher and we’re already pushing and putting in time-attacks in FP1, so that’s why the lap times are so fast.”
Just 0.009 behind him at the end of Friday’s proceedings sits Danilo Petrucci (Alma Pramac Racing), P7 overall for the Italian thanks to his FP2 time, with Johann Zarco (Monster Yamaha Tech 3) improving by over half a second in the second session to end Friday in P8.
Danilo Petrucci – P7
“We are in good shape in terms of speed but I don’t know if we can be as fast lap by lap on race pace. When the tyres start to heat up I feel a vibration that makes me lose grip. I haven’t tried the soft tyre yet and we’ll do it tomorrow. There’s a lot of confidence for qualifying”.
Danilo Petrucci
Johann Zarco – P8
“The first day in Malaysia has been very difficult for me. The base we had, even if we did the winter test, was not working here and I was pretty slow. Fortunately at the end of the session this morning, I could improve my lap time and be inside the top 10. Also in the afternoon I was in the top 10 at the end of the practice, but we are struggling a lot with the traction, with the rear grip. We try to work on it, but we couldn’t find a good solution yet. Therefore, I’m a bit worried for the rest of the weekend. I keep pushing, though it’s just another experience to take with this bike at this circuit. I hope we can find something that helps for the next days and be ready for the race. It’s a track I like, so I would love to have a decent feeling.”
Johann Zarco
Completing the provisional automatic Q2 places were Andrea Iannone (Team Suzuki Ecstar) in P9 and Aprilia Racing Team Gresini’s Aleix Espargaro in P10 – the latter struggling with grip in the afternoon.
Andrea Iannone – P9
“The weather here always makes things more difficult, and it’s very hot today like every year. We struggled a bit in the morning but in FP2 I could improve, we need to continue to work because I still have room for improvement in braking and acceleration. We’ll try our best and find the solutions so I can be quicker tomorrow. But I’m in the Top 10 and Q2 at the moment and that is a good sign.”
Andrea Iannone
Aleix Espargaro’ – P10
“I am happy with the way things went today. I continued using the upgraded bike and I had a good feeling straight away, especially in the morning. In FP2 I managed to be rather fast with used tyres. We need to work a bit more on grip at the rear, but overall, things are not bad. When I put on the soft tyre toward the end, on the other hand, something didn’t work. The grip was not what I expected, so I was unable to lower my time. In any case, a combined top 10 spot is a good start to the weekend for us.”
Aleix Espargaro’
Dani Pedrosa – P11
“Today we had not really a good feeling. No much grip on the rear and we also struggled a lot in turning. I could not make the pace I would like to have here. In the afternoon we improved the lap time but the grip was even worse. We need to improve the bike’s setup because so far we have not the feeling we had in the test. We must to figure out what to do for tomorrow and keep working hard. It will be important to go out tomorrow and try to improve.”
Dani Pedrosa
Local favourite Hafizh Syahrin, who is the only rider of the permanent MotoGP field, who had not tested this year before the Grand Prix at the Sepang International Circuit, had the difficult task to make up for this in just two sessions today.
Hafizh Syahrin – P18
“Today has not been easy. This morning I felt comfortable and we weren’t too far. In the afternoon, we changed the suspension on the bike to improve, but it doesn’t seem to be the right way. I feel a bit confused, because we have a rhythm, we have ok grip, but the bike doesn’t want to turn, so it’s really difficult. This afternoon we will analyse everything in order to make an improvement for tomorrow. We believe we can do it, but we need to find a good way.”
Hafizh Syahrin
Returning from injury, Jorge Lorenzo (Ducati Team) endured a tough opening day. The five-time World Champion finished bottom of the timesheets and over three seconds adrift of the fastest time, and will further assess his fitness on Saturday.
2018 MotoGP – Sepang Friday Combined Practice Times
RINS Alex SPA Team Suzuki Ecstar 1’59.608
DOVIZIOSO Andrea ITA Ducati Team 1’59.697 / 0.089 (FP1)
MARQUEZ Marc SPA Repsol Honda Team 1’59.701 / 0.093
ROSSI Valentino ITA Movistar Yamaha MotoGP 1’59.767 / 0.159 (FP1)
MILLER Jack AUS Alma Pramac Racing 1’59.771 / 0.163
ABRAHAM Karel CZE Angel Nieto Team 2’01.684 / 2.076
REDDING Scott GBR Aprilia Racing Team Gresini 2’01.690 / 2.082 (FP1)
LUTHI Tom SWI EG 0,0 Marc VDS 2’01.743 / 2.135
SIMEON Xavier BEL Reale Avintia Racing 2’01.900 / 2.292
TORRES Jordi SPA Reale Avintia Racing 2’01.940 / 2.332
LORENZO Jorge SPA Ducati Team 2’03.204 / 3.596 (FP1)
Moto2
Friday at the Shell Malaysia Motorcycle Grand Prix belonged to Alex Marquez (EG 0,0 Marc VDS) in the Moto2 class, as the 2014 Moto3 Champion topped both FP1 and FP2. The Spaniard managed to best Fabio Quartararo (MB Conveyors – Speed Up) at the end of FP2 by 0.030 after setting a 2:06.928 on his final lap so it was close but he kept the top spot, with Luca Marini (Sky Racing Team VR46) third – 0.161 back. He was just ahead of teammate and Championship leader Francesco Bagnaia and the two did a good few laps together on track, perfecting their teamwork…
The track conditions were tricky for the opening minutes of the second session but with the rain clouds clearing, the Moto2 field were able to get a good dry stint on Friday afternoon. At the end of play, Marquez and Quartararo were the only two riders to venture into the 2:06s, the latter improving from a P13 finish in the morning, but it was Bagnaia who had the advantage in terms of the title fight – with sole rival Miguel Oliveira (Red Bull KTM Ajo) a little further back in eighth.
Between the two, it was Mattia Pasini (Italtrans Racing Team) who completed the top five on Friday and the Italian led FP2 by over a second at the one point after ending FP1 in P2. Then the first of the KTMs on the timesheets was Sam Lowes (Swiss Innovative Investors) in P6, as he just got the better of Oliveira.
Behind the Portuguese rider, Pons HP40’s Lorenzo Baldassarri completes Friday in P8, with Remy Gardner (Tech 3 Racing) kicking off his weekend with a solid P9 on the combined times – the Australian consolidating a top ten place after ending FP1 in P7.
Remy Gardner – P9
“It has been a pretty good day here. This morning it was still patchy when we went out, but we put the slick in when there was still some water on track and we ended up seventh, which was quite decent. Before FP2 it was raining, so everyone went out with wet tyres and of course we did the same, but the track was completely dry after it dried up in just some seconds. We came back in, put some old slicks back in, did a run and improved on our time from this morning. At the end, we put in the soft tyre and made a big step forward. We still need a bigger jump for tomorrow, but I think we’re on the right track after a good start. We just have to see how the weather plays out.”
Remy Gardner
Australian GP winner Brad Binder rounded out the top ten on board his Red Bull KTM Ajo machine, moving up the timesheets after a tougher FP1.
Joan Mir (EG 0,0 Marc VDS) had a late crash at Turn 15 in the afternoon – rider ok.
2018 Moto2 – Sepang Friday Combined Practice Times
Marquez 2m06.928
Quartararo 2m06.958
Marini 2m078.089
Bagnaia 2m07.106
Pasini 2m07.107
Lowes 2m07.315
Oliveira 2m07.551
Baldassarri 2m07.605
Gardner 2m07.644
Binder 1m07.685
Moto3
Tony Arbolino (Marinelli Snipers Team) ended Day 1 at the Shell Malaysian Motorcycle Grand Prix at the top of the timesheets in the Moto3 class, with the Italian setting a 2:14.227 on a dry Sepang International Circuit before the rain started to fall with just under 20 minutes remaining, curtailing the day’s action. John McPhee (CIP – Green Power) and Aron Canet (Estrella Galicia 0,0) completed the top three, with Championship leader Jorge Martin (Del Conca Gresini Moto3) rounding out a top four covered by a mere 0.024 seconds.
After his huge Japanese GP crash, Niccolo Antonelli (SIC58 Squadra Corse) returns to action in Malaysia still nursing his injuries picked up in Motegi but nonetheless, the Italian impressed on Day 1 to end fifth fastest, just 0.122 off the top. Countryman Andrea Migno (Angel Nieto Team Moto3) completed Friday another tiny margin in arrears, 0.003 back in P6, with the same gap separating him from another Italian in P7: Enea Bastinaini (Leopard Racing). Title contender Marco Bezzecchi (Redox PruestelGP) is eighth overall, but the gap is just 0.155 between him and the fastest time.
Ninth quickest was fastest rookie Alonso Lopez (Estrella Galicia 0,0), with Australian GP winner Albert Arenas (Angel Nieto Team Moto3) rounding out a top ten that was covered by only 0.321 in Malaysia. P3 in the Championship, Fabio Di Giannantonio (Del Conca Gresini Moto3) finished Friday in P13.
2018 Moto3 – Sepang Friday Combined Practice Times
The man that has won here in Malaysia for the past two years has started where he left off by lapping the 5.54 km Sepang Circuit in an FP1 topping 1m59.697 this aftneroon.
Valentino Rossi put in a late lap to come from outside the top ten into second place on the timesheets with a 1m59.767. The #46 particularly fast in the second half of the circuit to push Phillip Island winning teammate Maverick Vinales back to third place.
Valentino Rossi – AJRN Image
The only other rider to get in the 1m59s in FP1 was Jack Miller. Like fellow Ducati rider Dovizioso it was the first half of the lap where Miller really shone, the Australian second only to the #4 Ducati through those first two splits.
Miller’s teammate Danilo Petrucci was fifth quickest and recorded the highest top speed through the traps at 326.1 km/h.
Suzuki’s Alex Rins and Aprilia’s Aleix Espargaro were next in sixth and seventh respectively just aheaed of Alvaro Bautista and Johann Zarco.
Marc Marquez rounded out the top ten as the leading Honda but obviously did not bother putting in a time attack lap in the session, his best a 2m00.801.
Jorge Lorenzo did put in 12 laps during the session and slowly built his pace but was still last on the timesheets at session end. It will be interesting to see if Lorenzo participates in FP2 and to whether he will stay on the bike for the rest of the weekend or be replaced by Ducati test rider Michele Pirro.
Ciba-Geigy Bonded Aeroweb frame made by Nigel Leaper
With Phil Aynsley
1986 Heron Suzuki TSR08 GP Racer
At the end of the 1983 season Suzuki officially retired from the 500cc GP championship as their venerable square four design (first seen in 1973) was no longer competitive.
Heron decided to invest in a new, light weight chassis made from Ciba-Geigy Bonded Aeroweb (a honeycomb/composite) material, constructed by Nigel Leaper. The first two prototypes were made with an aluminium cladding (painted white) but the following six frames just used the (black) honeycomb material.
1986 Heron Suzuki TSR08 GP Racer
Records show that this bike (TSR08) was the last one constructed, in 1986, and was ridden at Spa by Kevin Schwantz to 10th place (in Rizla colours) – his first points in Grand Prix.
1986 Heron Suzuki TSR08 GP Racer
Later in the season it was ridden by Niall MacKenzie in the Skoal Bandit colours seen here. He scored three top ten places and was on the front row of the grid for the last race of the year, at Misano.
1986 Heron Suzuki TSR08 GP Racer
The motor was the final version of the square four, the reed-valve XR70RV which produced 148hp at 12,500rpm (with UK developed exhausts, heads & air-boxes). Dry weight was 115kg. Top speed 295kph.
The Heron Suzuki TSR1-0 in Barber Museum
The first bike (TSR1-0) can be seen at the Barber Museum in the US.
The Heron Suzuki TSR1-0 in Barber Museum
The Heron Suzuki TSR1-0 in Barber Museum1986 Heron Suzuki TSR08 GP Racer1986 Heron Suzuki TSR08 GP Racer1986 Heron Suzuki TSR08 GP Racer1986 Heron Suzuki TSR08 GP Racer1986 Heron Suzuki TSR08 GP Racer1986 Heron Suzuki TSR08 GP Racer
Shoei have announced a new iteration of the popular and versatile GT-Air helmet, the Japanese manufacturer claims that the GT-Air II again raises the bar for high-end helmet comfort, style and safety.
Shoei GT-Air II in Deviation TC-9An aggressive and compact shell design has been verified by wind tunnel tests for relaxed rides and less turbulence. The GT-Air II is also prepared for SENA SRL2* (Shoei Rider Link2) Intercom System, which is integrated into the helmet shell with no protruding operating unit.
Shoei GT-Air II in Conjure TC-9
The 3D-molded visor (CNS-1) with optimised visor base offers extra wide vision and a unique shape for optimum sealing. The modified QSV-2 internal sun visor used on the GT-Air II has been lengthened by 5mm in order to reduce the amount of light coming through the gap between the lower edge and the eye port.
Shoei GT-Air II in Affair TC-3, Affair TC-6, Conjure TC-6
A stainless steel micro ratchet retention system and a fully removable and washable interior ensures maximum rider comfort. The six size options are XS-XXL and will be produced out of three different outer shell constructions cover XS-M, L and XL-XXL) for perfect fit and compact dimensions.
The Shoei GT-Air II is also Sena SRL2 ready
A new developed ventilation system with two inlets at the upper head and chin area as well as four outlet vents at the top back makes for an ideal sports touring and everyday choice for motorcyling enthusiasts!
Shoei GT-Air II in Affair TC-1
In terms of helmet graphics, there’s a variety of options available, while also a number of solid options available.
Shoei’s new GT-Air II helmet
The Shoei GT-Air II is expected to be launched worldwide in March next year. In Australia it is expected to sell alongside the current GT-Air model, with the new intercom ready unit priced slightly higher than the much loved regulart GT-Air.
Alpinestars is expanding its line of urban riding jackets with its new Warhorse. Touring riders haven’t been neglected either, as two new offerings – the Streetwise Drystar Pants and T-SP W Drystar Glove – also make their debut in the US lineup.
Begin press release:
Warhorse Leather Jacket
An aggressively-styled urban sport riding jacket constructed from a durable premium leather for comfort, the Warhorse Leather Jacket incorporates a removable heavy thermal liner, making it ideal for city riding in a variety of weather climates. With CE-certified protection on the shoulder and elbows, plus the ability to upgrade with Alpinestars Nucleon chest and back inserts, the Warhorse offers class-leading protection.
Premium leather main chassis constructed from 1.1 mm leather, with a Nubuck finish treatment for a stylishly unique look.
Stretch panels on underarms and sleeves, plus leather accordion inserts on arms, for an enhanced fit and feel.
Snap buttons on the waist and cuff adjustment for optimized riding fit.
Two zippered hand pockets, plus zippered chest pocket.
Embroidered logos on front and back with heat stamp logos on shoulders.
Low profile collar construction with perforated leather padded edging for comfort.
Pre-curved sleeve construction reduces fatigue.
Removable thermal liner (100g on body, 80g on sleeves) allows the jacket to be worn in cooler climates.
Snap button connection system allows jacket to be attached to the belt loop of Alpinestars Tech Denim Pants.
Chest and back compartments (Alpinestars Nucleon chest and back inserts available as accessory upgrade).
CE-certified class-leading shoulder and elbow protectors.
The garment is CE-certified.
Streetwise Drystar Pants
The Streetwise DRYSTAR® Pant has a multi-fabric main shell construction incorporating strategic ballistic nylon reinforcements and CE-certified protection, as well stretch inserts on the crotch and knee. A laminated DRYSTAR® membrane, for guaranteed levels of waterproofing and breathability without excessive material bulk, and a removable thermal liner mean this pant can be worn in a wide range of weather conditions.
Multi-fabric, multi-panel main shell construction for optimized levels of fit, comfort and durability.
Laminated DRYSTAR® membrane for 100% waterproofing and excellent breathability. The bonded membrane construction makes for lighter garment and reduced material bulk.
Removable thermal liner (100g, thigh, 80g lower leg) means pants can be worn in a variety of climate conditions.
Strategically positioned ballistic nylon inserts for durability and seam strength.
Stretch insert on crotch and knee area offers an enhanced range of leg mobility.
Two deep zippered hand pockets for peace-of-mind storage of belongings.
Ventilation openings feature zippers to easily control levels of cooling and internal airflow.
Reflective prints on side of the pants make the rider more visible to other road users.
Multiple hook and loop volume adjusters on legs.
Hook and loop strap on waist adjuster for improved riding fit.
Waist connection zipper allows attachment to Alpinestars riding jacket.
Silicon print on back seat area in order provides greater grip on seat.
Fixed soft full mesh lining for comfort and breathability.
Developed to accommodate the CE-certified Nucleon KR-H Hip Protector (available as accessory upgrade).
Internal Level 1 CE-certified Bio Armor knee protectors for class-leading protection.
This garment is CE-certified.
T-SP W Drystar Glove
A sport riding glove constructed from advanced stretch textile and softshell, the CE-certified T-SP W DRYSTAR® Glove is waterproof and breathable. With class-leading knuckle protection and a leather palm for comfort and control, this glove is ideal for performance riding.
Sport styled, mid-length cuff glove constructed from stretch polyamide fabric and softshell on the backhand with goat skin on the palm, thumb and sidewall.
Incorporates Alpinestars waterproof DRYSTAR® PERFORMANCE sealed triple layer construction for a highly reduced material construction that promote dexterity and sensitivity of bike controls.
PU coated reinforcement zones on thumb and palm for durability.
Synthetic leather reinforcements with foam padding on the palm and outer hand landing zone to provide abrasion resistance.
Double hook and loop grip wrist closure system for greater ease of use and comfort.
Reflective insert makes the rider more visible to other road users.
Touch screen compatible fingertips for use with smart devices.
Advanced polymer hard knuckle offers class-leading protection without impairing hand flex or movement.
Alpinestars patented third and fourth finger bridge to prevent finger protection rolling out of position.
Here at MO, we’re always happy to learn of the availability of new helmet brands in the US market. NEXX Helmets and Rev’It! joining forces is good news!
Begin Press Release:
NEXX Helmets announces exclusive distribution partnership with REV’IT! USA for North American market.
Amoreira da Gândara, Portugal / Brooklyn, NY (November 1, 2018) – NEXX Helmets andREV’IT! USA have formed a partnership that gives REV’IT! USA exclusive North American distribution rights for the Portuguese brand, one of the most trusted, last-standing European manufacturers of motorcycle helmets. The partnership is effective as of December 1, 2018.
REV’IT!, a global leader in protective motorcycle apparel, will migrate all NEXX USA sales and marketing operations to its US East Coast headquarters in Brooklyn, New York. The alliance will create a position for NEXX Helmets to more deeply penetrate the US and Canadian markets, and to deliver the highest level of service and support to its dealers.
For Pedro Gonçalves, Director for Business Development of NEXX Helmets, the appointment represents a significant step forward for the company: “With REV’IT! USA, we have established a valuable partnership with a company that has a solid, strategic approach in the product lines they represent, as well as a proven track record of responsive service and support. We certainly share REV’IT! USA’s corporate values and commitment to product quality and customer support, and we have everything in place to take NEXX Helmets to a wider audience in North America.”
“NEXX Helmets is a trusted name and has delivered relevant and high-quality products to the market for years,” said Paolo Bacchiarello, Vice President of Operations at REVIT! Sport USA. “We’re excited that NEXX’s premium helmets are now part of the REVIT! USA product portfolio and we look forward to delivering more great content in the coming years.”
Under the terms of the new agreement, REV’IT USA will ensure a seamless transition and smooth continuation of dealer- and consumer-facing customer service, including distribution channel logistics and after-sales service.
Bringing you the Best Motorcycle News from Around the Web!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
