Kawasaki’s Ninja ZX-6R sportbike is powered by a liquid-cooled, 636cc in-line four-cylinder engine that’s 37cc larger than competing Japanese 600-class bikes, giving it more usable power.
For 2019, the Ninja ZX-6R gets new styling with twin LED headlights and an LED taillight, a Kawasaki Quick Shifter (KQS), updated instrumentation, Euro4 emissions compliance and optimized gear ratios.
Perhaps the biggest news for 2019 is that Kawasaki has slashed the base price of the Ninja ZX-6R by $1,700, to $9,999, making it significantly cheaper than 600cc sportbikes from Honda, Suzuki and Yamaha.
The Ninja ZX-6R’s 636cc in-line four has a bore and stroke of 67.0 x 45.1mm. To meet Euro4 emissions regulations standards without compromising the engine’s performance, ultra-fine atomizing fuel injectors with precise settings were utilized. Feeding the engine is a large, 5.1-liter air box, which helps to create peak power and smooth power delivery. The intake funnels have two different heights for strong low-mid range performance, the piston skirts have a molybdenum coating to reduce friction and connecting passages between the cylinders reduce pumping losses.
For optimal performance, all four exhaust header pipes are connected using joint pipes, which contribute to low-mid range torque. An exhaust pre-chamber minimizes silencer volume and contributes to mass centralization, while the silencer’s triangular cross-section allows the requisite volume as well as a high lean angle and a compact image.
A six-speed, cassette-style transmission makes it easy to change gear ratios quickly for track days or racing, and a shorter final gear ratio (15/43) enhances acceleration. The transmission is mated to an assist-and-slipper clutch and the new Kawasaki Quick Shifter (KQS).
Holding the Ninja ZX-6R together is a pressed-aluminum perimeter main frame and a two-piece, die-cast aluminum subframe. Complementing the chassis design, the 636 is equipped with fully adjustable suspension, including the Showa SFF-BP (Separate Function Fork-Big Piston) fork and a Showa rear shock. Cast aluminum 17-inch wheels are shod with Bridgestone Battlax Hypersport S22 tires and braking is handled by radial-mount four-piston opposed front calipers squeezing semi-floating 310 mm stainless-steel petal discs and a two-piston pin-slide rear caliper squeezing a 220mm disc.
In addition to KQS, other electronics include a Power Mode selector (Full and Low), Kawasaki TRaction Control (KTRC) with three modes plus off and, on ABS models, Kawasaki Intelligent anti-lock Brake System (KIBS).
Styling changes for 2019 include a new front cowling and windscreen, twin LED headlights, a redesigned tail cowl, an LED taillight, a new heel guard and a new finishing process for the silencer. Also, the new seat is shorter front-to-back for improved comfort and feedback from the chassis, as well as narrower in front to make it easier for riders to get their feet on the ground. And complementing the adjustable front brake lever is a new adjustable clutch lever with five available positions.
Pricing and color options are as follows:
Ninja ZX-6R ($9,999): Pearl Storm Gray/Metallic Spark Black or Metallic Spark Black/Metallic Flat Spark Black
Ninja ZX-6R ABS ($10,999): Pearl Storm Gray/Metallic Spark Black
Indian’s new Ride Command infotainment system features updated software and mobile app integration.
Begin Press Release:
INDIAN MOTORCYCLE ANNOUNCES RIDE-ENHANCING TECHNOLOGIES FOR INDUSTRY-LEADING RIDE COMMAND® INFOTAINMENT SYSTEM
New Software Update & Mobile App Offer Online Route Planning with Wireless Bike Transfer & Remote Vehicle Information Accessibility
MINNEAPOLIS (November 30, 2018) – Indian Motorcycle, America’s first motorcycle company, continues to enhance its rider experience with the announcement of an all-new Ride Command® mobile phone app and software update. Ride Command is the largest, fastest, most customizable system on two wheels, featuring an industry-leading, glove-compatible, seven-inch touchscreen. Its latest software updates allow riders to easily plan ride routes via a desktop platform, while an all-new Ride Command mobile app wirelessly transfers the directions to the bike’s navigation system and provides remote accessibility to key vehicle information.
Owners can update their Ride Command by visiting a local dealership or by quickly downloading the software to a USB drive at RideCommand.IndianMotorcycle.com. The website also serves as the platform for riders to plan ride routes with up to 100 waypoints. The point-by-point directions can then be wirelessly transferred to the bike using the Ride Command mobile app and a Bluetooth® connection to the infotainment system. The pairing of these new technologies allows riders to view vehicle data, including fuel level, oil life, tire pressure & battery charge remotely on their mobile device. Riders can also track rides, view service recommendations and log maintenance within the mobile app. The Ride Command mobile app can be downloaded for free in the Apple Store and Google Play.
“We continually focus on enhancing the rider experience,” said Reid Wilson, Senior Director for Indian Motorcycle. “Our industry-leading Ride Command infotainment system is an easy-to-use platform that enables us to continually expand features with exciting new software updates. Pre-ride route planning and remote vehicle data accessibility are features our riders have asked for, and we’re excited to deliver these technologies.”
Riders can set push notifications within the Ride Command mobile app and receive alerts for important service reminders. The app also tracks rides and allows riders to conveniently share completed or planned rides with friends on Facebook.
Riders can further update their Ride Command by downloading the free 2018 map updates at the Ride Command website or via a local dealer. New Chieftain and Roadmaster owners receive three years of complementary map updates.
The new Ride Command updates further expand Indian Motorcycle’s ride-enhancing technologies announced earlier this year, as the 2019 Chieftain lineup and the 2019 Roadmaster are equipped with three selectable ride modes and rear cylinder deactivation for improved rider comfort when traveling at slower speeds. Pricing for the 2019 models begin at $21,999 for the Chieftain, $24,999 for the Chieftain Classic, and $25,999 for the Chieftain Dark Horse and Chieftain Limited. Roadmaster pricing starts at $28,999.
“The important thing was to find the base and now for Malaysia, we have to improve the top speed a little bit, that will be very important for long tracks. We need more traction, this is still our weak point. But overall I think we have a really competitive bike. As I said we didn’t play with the chassis, we just wanted to try the engines, the lap time was there, very consistent. I was able to keep high 38s and low 39s on the pace, so this is really good I think. So let’s see, I was riding when the track conditions were worse to try to improve myself and I’m actually really happy.”
“I’ve always tried to help Taka and I always will, he’s a really good kid,” is how Cal Crutchlow (LCR Honda Castrol) begins his assessment of his teammate, Takaaki Nakagami (LCR Honda Idemitsu). But he’s quick to correct himself in one way. “No disrespect to him, I’m not really calling him a kid! But he was a rookie this year and I was impressed with what he did. I think the motorcycle he was on this year was difficult to ride, as we know it was down on top speed, now he’s got the bike that we had this year and he’s obviously showing his potential. He’s always fast in Jerez, we can’t take that away from him, but even in Valencia he was good. So we know he’s maturing as a rider, and I’m impressed as much as the team are.”
Know your thresholds for when it’s too hot, too cold, or too wet to ride. The same goes for state of mind, your health, and your level of conditioning.
Kymco announced their SuperNEX concept electric motorcycle at EICMA, ushering in a superbike themed offering that the brand boasts will include a gearbox to try and retain the familiar characteristic for motorcyclists interested in going electric.
Allen Ko – KYMCO Chairman
“While people have no doubt that the next era of personal transportation is electric. Many are still pondering over the profound implications of electric in the world of supersport motorcycles. The quiet nature of the electric motor troubles motorcycle enthusiasts and without the gratification of gear shifting, the simple twist-and-go interaction feels more utility-oriented, and sometimes even toy-like. Also, most electric motorcycles today lack the sustaining thrill of acceleration to the top-end after the initial rush. As a result, many sportbike lovers fear that supersport might lose its charm in the impending new electric era.”
These design philosophies built around Kymco’s rider insights in this segment come to life in five tangible approaches: that shifting is an important part of motorbike riding, the best acceleration feels like a completion of a thought; excitement comes from exploring limits with confidence; sound is part of the character of the machine; and a great vehicle elevates the rider’s every occasion.
Electric Motor – Sport Transmission
The SuperNEX was designed around the philosophy that shifting is an integral part of motorbike riding, which is a fair assumption since almost any machine without gears is a scooter. Hence, Kymco’s electric supersport machine will feature a six-speed transmission that allows riders to more fully engage with their motorcycle. The SuperNEX also comes with a clutch-less upshift and downshift feature however, in true modern supersport form, while a slipper clutch further helps smooth out the ride on aggressive downshifting.
Interesting power delivery
Kymco also claim that an unfortunate shortcoming of today’s electric motorcycles is that the inherent characteristic of the electric motor has a power curve that reaches maximum horsepower at midrange and then declines thereafter.
As a result, on a single gear electric motorcycle, once it reaches a certain speed the surge of acceleration starts to fade noticeably. Moreover, this lack of power is most often felt at high-speed riding, which supersport riders enjoy the most.
To combat that they present the SuperNEX as featuring the six-speed transmission to allows riders to make use of the more traditional optimal ‘power band’ of the motor to extract a more engaging experience.
The gearbox helps improve not only the efficiency and responsiveness, but also the acceleration and top speed. As a result, the SuperNEX can go from 0 to 100km/hr in 2.9 seconds, from 0 to 200km/hr in 7.5 seconds and from 0 to 250km/hr in 10.9 seconds.
Rider Aides
The capabilities of today’s supersport motorcycles exceed the skills of most riders, with electronics often being used to reign in the incredible performance on offer. To allow sportsbike lovers to confidently engage with the SuperNEX, Kymco created Kymco FEP – Kymco Full Engagement Performance – a performance management system that allows the rider to explore the limits with the benefit of rider aides.
During hard acceleration, FEP ensures there is no wheelie or wheel slippage. During hard braking, FEP prevents rear wheel lifting. When riding through uneven or wet surfaces, FEP also provides maximum traction. Moreover, the degree of FEP engagement can be adjusted to riders’ preference.
Kymco Active Acoustic Motor
Electric motor are quiet by nature, and this becomes an issue on a supersport bike because without sound, the character, sensation, and passion of the machine are lost. The SuperNEX, on the other hand, offers the Active Acoustic Motor, which is designed to convey the heartbeat of the machine.
The motor has a multi-frequency acoustics generator that reconstructs the dynamic sounds of the motor with great authenticity. It delivers the iconic supersport thrills and messages that sportbike riders seek. The sound can be further tuned to rider’s liking for its character and volume.
“Adaptive Machine Personalities”
Today’s supersport motorcycles let riders set certain electronic functions, and in a departure from the conventional electric motorcycles, SuperNEX offers four modes of vehicle ‘personality’, which they describe as:
Poised
Assertive
Bold
Extreme
These ride modes or ‘personalities’ will offer sportbike riders a variety of different motorcycle characteristics, making for a more dynamic experience, whether that means picking the mode that suits them as a rider, or just their day to day mood.
Allen Ko
“With SuperNEX, Kymco marks the beginning of the next era of supersport, we believe electric opens up a new era of boundless opportunities to win the hearts of the most discerning riders all over the world.”
Yamaha ace undergoes successful operation to repair ruptured achilles.
Image: Foremost Media.
Popular Queenslander Dan Reardon has successfully undergone surgery to repair a ruptured achilles tendon sustained at last weekend’s Monster Energy S-X Open Auckland, allowing him to immediately start his recovery.
Reardon struck a tough-block prior to completing his Superpole lap in New Zealand, forcing him to come up severely short on the finish line double and ultimately resulting in the injury.
“Everything went well yesterday – I walked into surgery early in the morning and fixed the achilles,” Reardon told MotoOnline.com.au. “Now I’m in a half-cast for the next seven to 10 days until I get my stitches out, then I’m in a boot for about eight weeks before I start rehab.
“I’ve got plenty of time to get it right – this injury can take up to five months to heal, but it can also heal sooner. I won’t push it – I don’t have to be back by a particular time, so whenever it feels like it’s ready, I’ll start trail riding and having some fun.
“I might be riding by February, but it all just depends on the injury and the risk versus reward. It’s too early to say. I think I still may go to the states and do some supercross there – that was always part of the plan and the series goes until May, so that could still be a viable option. For the time being, I’ll just enjoy the time off and let the body heal.”
Reardon promoted himself to third in the Australian Supercross Championship this year after landing on the podium at the Monster Energy AUS-X Open Sydney finale, becoming the highest-placed Australian at the prestigious event.
GS Safari heads to New South Wales High Country in 2019.
Image: Supplied.
BMW Motorrad Australia is celebrating its 25th anniversary of BMW Safari with a five-day tour in 2019, which will see the GS Safari head to the New South Wales High Country.
Since 1994 BMW Safari has played a valuable role in the lives of BMW motorcycle owners and enthusiasts across Australia, from hosting tours in tropical rainforests in far north Queensland, to mountainous trails in Tasmania, BMW Safari events have been providing pure motorcycling adventures for almost 25 years.
Commencing in Windsor north of Sydney on 7 April 2019, the ride will take participants on a five-day tour through the motorcycle paradise of northern New South Wales. Riders will experience an abundance of riding highlights across a variety of off-road trails and dynamic bitumen roads that lead them to the completion of the ride in Coffs Harbour on 12 April.
The week will pay homage to the heritage of BMW Safari events of past, whilst looking towards the future and celebrating the evolution of GS motorcycling in Australia.
There is also the opportunity for participants to combine the Safari with a BMW Off-Road Training course which aims to build rider confidence and skills before the five-day ride.
The three defendants charged with speeding detected by police on Lidar guns had their fines overturned.
Now, SAPOL is temporarily withdrawing Lidar guns until legislation is amended to resolve the legal issues with regard to the evidentiary certificates.
They are also withdrawing 125 speeding fine prosecutions.
South Australian Ride to Review spokesman Tim Kelly says anyone who copped a Lidar speed fine and has not yet paid should apply for a review.
Contact [email protected]ov.au or write to SAPOL addressing the request to Expiation Notice Branch, GPO Box 2029, Adelaide, SA 5001.
Impact for other states?
While the judgments were delivered in the South Australian Supreme Court, they could have an impact for all states and territories if the calibration of the guns is questioned.
However, there is no movement yet by other states to withdraw Lidar guns.
The three decisions were all based on an argument put forward by lawyer Karen Stanley of Stanley Law. Her full statement on the judgments is included in full at the end of this article.
The judgments are based on a previous case run by Ms Stanley in 2016 case where speeding charges were thrown out because of the police calibration methods for the LIDAR hand-held speed gun. In one of the three recent cases, a motorcyclist was recorded riding 126km/h in a 60 zone in Adelaide.
“My attack was to the certificates that prosecution uses to prove that the guns were accurate,” Karen says.
Lidar gun ‘not at fault’
She points out that the Lidar guns are not necessarily inaccurate or unreliable, but that the police method of calibration, and the way police certify their accuracy, is at fault.
Whether the judgments will apply across all states and territories will depend on the wording of the certificates and what the law says, she says.
“However, I expect that the broad principles His Honour addressed in the substantive case of Police v Hanton, will apply in all states,” she says.
“The Crown may appeal against the judgments so until that time has lapsed, it would not be appropriate to draw conclusions about the future of speeding charges from these judgments” Reviewing methods
Justice David Peek criticised South Australian Police for failing to change their testing system since the 2016 verdict.
He wrote that police appeared willing to “accept the odd setback in terms of a not-guilty trial because the cost of that is less than fixing the system”.
There is no word yet from government on changes to legislation to allow police to start using the guns again.
Meanwhile, SAPOL say they will continue to use other “well-established speed detection options” such as hand-held radar devices and fixed and mobile speed cameras.
Stanley Law statement regarding South Australian Supreme Court Judgments
POLICE v HANTON [2018] SASC 96
POLICE v MILLER [2018] SASC 97
POLICE V HENDERSON [2018] SASC 98
On Thursday 19 July 2018, the South Australian Supreme Court published three significant judgments about the use of hand held LIDAR speed guns to detect vehicle speeds. These cases all relied on the argument successfully raised in Police v Butcher, a 2016 Supreme Court decision that resulted in speeding charges against the defendant being dismissed. While the individual cases are complex, the unifying issue in each was the reliance by prosecution on a certificate to prove the accuracy of the speed guns used to detect the speed of the defendants’ vehicles. Justice Peek found that the certificate relied on by the prosecution was not capable of proving the accuracy of the speed gun to within the margin of error stated in the certificate.
To be clear; the Supreme Court did not say that the speed guns were inaccurate. Rather, the Court found that prosecution could not prove that the devices were accurate by relying on the certificate. Speculation on social media that the judgments have “proved” that speed guns are inaccurate and unreliable, is incorrect.
There is always a presumption of innocence and prosecution must prove, beyond reasonable doubt, that the offence was committed. One of the things that prosecution need to prove for speeding charges is that the device used to detect the vehicle is accurate. It would be cost prohibitive for prosecution to prove the technology behind the speed devices in every case. This would require experts to give evidence at every trial on how the devices work. To simplify this, the law in Australia allows the prosecution to rely on certificates, signed by a senior police officer, that certify the accuracy of the speed gun used. That certificate then becomes proof of the accuracy of the speed gun and the onus then switches to the defendant to provide “proof to the contrary” of what is certified.
While it may appear that this shifting of the evidentiary burden means that in speeding cases the defendant has to prove that they are not guilty, in actual fact, this only occurs once prosecution have proved that the device is accurate. It’s the certificate that prosecution relies on to prove this. The burden of proof only switches to the defendant once there is proof of the accuracy of the device.
The argument in the 2016 case, and in each of the three judgments handed down last week, was that the prosecution could not rely on the certificate because prosecution could not prove that the gun was accurate to the extent certified in the certificate, ie, within a margin of +2/-3kph. Without the certificate, there was no evidence of the accuracy of the device and therefore prosecution could not prove the speed of the vehicle. This is why the alleged speed of the defendant was irrelevant. For these purposes it does not matter whether the alleged speed was 5kph over the speed limit or 100kph over the speed limit.
Speed guns are required to be calibrated every 12 months in accordance with the Australian Standards. This involves an extensive process of testing the gun in a simulator. When a speed gun is calibrated, a report is issued which states that the gun is accurate to within a specific margin of error.
In addition, police are required to perform a number of daily tests, as prescribed by the manufacturer. These tests are recorded as pass/fail. The law requires that these tests are performed on the day that the device is used. The results of these tests are then used when producing the certificate.
In each of judgments published in July 2018 Justice Peek held that prosecution could not rely on the certificate because the daily testing by police doesn’t show that the devices are accurate to within +2/-3kph. The finding in each of these cases is the defendant did not need to prove that the device was inaccurate, but only that the daily testing done by police didn’t prove that the device was accurate to the extent claimed in the certificate. Without the certificate the prosecution was unable to prove the speed of the vehicles.
In addition, Justice Peek made a number of criticisms of the current testing regime of speed detection devices, and the circumstances under which the certificates are issued. Justice Peek further expressed concern that despite warnings in 2016 (Butcher) and 2017 (Henderson), the prosecution of speeding charges has continued without addressing the issues raised in the earlier cases.
SAPOL has issued a statement confirming that they are assessing the judgments “to fully comprehend if changes need to occur”. These judgments make it abundantly clear that changes need to occur. While SAPOL and prosecution continue to prosecute speeding charges in the manner they have to date, defendants will continue to have speeding charges dismissed. The argument first raised in Police v Butcher is clearly not a “one-off” as stated at the time.
The judgments handed down last week are lengthy and complex and will require further analysis in order to determine what ramifications these judgments have beyond the individual cases, although it is already clear that the broader implications are significant.
There is some commentary on social media about what impact these judgments will have on expiation notices issued since SAPOL was first put on notice about problems with relying on the certificates. At this stage it is too early to speculate on this.
Frenchman satisfied with direction heading into 2019.
Image: Supplied.
With four days total under his belt aboard the Red Bull KTM Factory Racing RC16, Johann Zarco has declared he’s still working on locking down a base setting aboard the Austrian MotoGP machine.
The Frenchman wound up 19th on day two of testing in Jerez, Spain, although the number five confirmed laying down a fast-lap wasn’t the focus throughout the two days, instead he enhanced developments in his transition from Yamaha machinery.
“Some more days with the KTM and I’m happy because I made a step that I was looking for,” Zarco explained. “It gave confirmation for the technicians for which direction we have to go. We began today on a better level and I was improving my lap-time. We then moved to test different things and could not do so many laps.
“We are still working on my base setting. We are not working to be the fastest one out there but the base is coming better and better every time I go out, and I can see that because the lap-time is there and I can repeat it relaxed. It means this is the direction we need.
“This engine is giving a good feeling to go out of the corner. Even if you miss it the bike will go and this is still one of our strong points and when we go faster we will be able to use it even better.”
Red Bull KTM Factory Racing team manager Mike Leitner spoke of Zarco’s continued adaptation to the RC16, stating his understanding of the motorcycle greatened after clocking up 120 laps in the two-day test.
“Johann made a big step with his understanding of the bike and went into the 1m39s lap-times with used tyres and that was positive,” said Leitner. “Also his feeling on the bike was getting better but for sure we still have a lot of work to do with him also. We’ll work during the winter now to be ready for Malaysia.”
Bringing you the Best Motorcycle News from Around the Web!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok