2021 Kawasaki Ninja ZX-10R / Ninja ZX-10RR
Hot on the heels of a sixth consecutive WorldSBK title, the Ninja ZX-10R and ZX-10RR homologation special feature a number of highlights for 2021, some of which are easy for the eye to spot while a few others hide under the skin… Let’s take you through them.
2021 Kawasaki ZX-10R at a glance
- Chassis geometry and suspension settings changed
- Next Generation aero with integrated Winglets
- Ergonomic changes put rider in new position
- New Power Mode selections
- New Colour TFT instrumentation
- Ohlins electronic steering damper
- Kawasaki engine brake control
- New Air-Cooled Oil Cooler
- New Electronic Throttle Valves
- New Exhaust System
- New Transmission Gear Ratios
- TPS relocated to bar eliminating throttle cable
- Swingarm pivot is 1 mm lower
- 200 horsepower at 13,200 rpm for the ZX-10R
- 201 horsepower at 14,000 rpm for the ZX-10RR
- With ram-air effect at speed Kawasaki claim an extra ten horsepower
The striking new front end features integrated winglets. Kawasaki claim 17 per cent more downforce is achieved thanks to the new design.
Inside the new cowling a race style TFT dash (including Bluetooth connectivity), four handlebar button selectable rider modes, along with electronic cruise control and optional heated grips.
A two-way quick-shifter is standard and the comprehensive electronics package takes its cues from a Bosch IMU.
Swingarm pivot is 1 mm lower
Longer wheelbase (1,440 mm >> 1,450 mm) care of a 2 mm greater fork offset and an 8 mm longer swingarm offers greater overall stability. The revised fork offset results in a shorter trail, which facilitates changing direction, especially in the off-throttle phase of the corner (after tip-in, before apex).
A redesigned rear seat contributes to an area of low pressure behind the rider while a new foot-peg positioning, a 40 mm higher screen and handlebars have been adjusted according to KRT rider input.
Chassis updates include a 1mm lower swing-arm pivot point (adjustable on the RR), 2mm greater front fork offset and an 8mm increase in actual swing-arm length all contributing to increased stability and greater traction.
Spring rates have changed too with the front now softer and the rear harder while a wider fork clamping area for the lower triple-clamp revises the rigidity balance for the fork outer tubes.
Brembo M50 monobloc calipers clamp 330 mm semi-floating front discs and a radial pump master cylinder complete the braking package.
All LED lighting utilises direct projection unit headlamps from Mitsubishi; their luminous optical modules being adopted for motorcycle use for the very first time.
Gear ratios are refined with 1st, 2nd and 3rd lower than its predecessor while the rear sprocket has gained a couple of extra teeth with final drive now 17/41.
The inlet ports have been changed for more performance and are fed by new throttle valves while spent gases now exit via new exhaust system.
A new KRT developed air-cooled oil cooler transfers straight from track to street reinforcing the link between race and road for Ninja fans.
For the RR homologation model new Pankl pistons and matched DLC coated piston pins are 20 g lighter each and mated to Pankl connecting rods which allow the RR to extend its rev capacity 400 rpm higher than the regular ZX-10R. Weighing 102 g less each, the lighter connecting rods contribute to reducing the crankshaft’s moment of inertia by 5 per cent. In addition to benefiting engine response and handling, this makes it easier for riders to weight the front wheel on corner entry. The RR pistons have one less piston ring than standard which enables a much shorter piston height at 33.7 mm and reduces friction.
The RR also sports new cams and valve springs while the intake funnels in the air-box has been dramatically reduced in height, they were 10-30-30-10 mm but are now an even 5 mm across the four intakes.
The RR rolls on Marchesini rims and adds braided brake lines. The RR is a limited-edition model with only 500 units produced worldwide.
7-spoke multi-directional forged aluminium wheels jointly developed with Marchesini contribute to quicker changes of direction
| 2021 Kawasaki Ninja ZX-10R Specifications | |
| Engine | 998cc, 4-stroke, In-Line Four, DOHC, 16-valve, liquid-cooled |
| Bore x Stroke | 76.0 x 55.0mm |
| Compression Ratio | 13.0:1 |
| Claimed Power | 200 hp at 13,200 rpm (RR 201 hp at 14,000 rpm) |
| Claimed Torque | 114.9 Nm at 11,400 rpm (RR 111.8 Nm at 11,700 rpm) |
| Induction | DFI w/47mm Mikuni throttle bodies (4) with oval sub-throttles, two injectors per cylinder |
| Gears | Six-speed, return shift |
| Clutch | Wet multi-disc |
| Frame | Twin spar, cast aluminium |
| Forks | 43mm inverted Balance Free Fork, adjustable stepless rebound and compression damping, spring preload adjustability, 119 mm travel |
| Shock | Horizontal back-link with Balance Free gas-charged shock, stepless, dual-range (low-/high-speed) compression damping, stepless rebound damping, fully adjustable spring preload, 114 mm travel |
| Tyres | 120/70 ZR17 (F), 190/55 ZR17 (R) |
| Front Brakes | Brembo dual semi-floating 330mm discs with dual radial mounted monobloc 4-piston calipers, KIBS |
| Rear Brake | Single 220mm disc with aluminum single-piston caliper, KIBS |
| Electronics | Electronic Cruise Control, Kawasaki Launch Control Mode (KLCM), Kawasaki Intelligent anti-lock Brake System (KIBS), Kawasaki Sport Traction Control (S-KTRC), Kawasaki Engine Braking Control, Kawasaki Quick Shifter (KQS) (upshift & downshift), Kawasaki Corner Management Function (KCMF) |
| Instrumentation | TFT |
| Kerb Weight | 207 kg (205 kg RR) |
| Seat Height | 835 mm |
| Wheelbase | 1450 mm |
| Rake / Trail | 25.0°/106.7 mm |
| Fuel Capacity | 17 Litres |
| Service Intervals | N/A |
| Warranty | N/A |
| Available | N/A |
| Price | N/A |
2021 Kawasaki ZX-10R Video
Source: MCNews.com.au